You wouldn't expect crushing. If the wood is crushed, you've over tightened the bolts.
I'd like to point out that the metrinch is a particularly useless unit of measurement. Inches and fractions is archiac but manageable. Metric is robust and intuitive. Inches with decimal places is just asking for mistakes IMHO. Sent from Samsung Mobile -------- Original message -------- From: jon kimmel <jkimmel50 at gmail.com> List-Post: krnet@list.krnet.org Date:13/11/2013 19:22 (GMT+00:00) To: KRnet <krnet at list.krnet.org> Subject: Re: KR> waf material The as5048 section shows 2.16 for in board.? Add two 3/32 webs and you get 2.3475.? I measured mine and they came up to closer to 2.39...but the distance between the wafs was closer to 2.30...I had a little crushing. With the inboard and outboard thickness per plans the interference would be just 1/32...I wonder if crushing was taken into account?? The thinner outboard spar wouldn't crush as much as the inboard. https://sites.google.com/site/mykr2stretch/ https://sites.google.com/site/mykr2stretch/parts-for-sale On Nov 13, 2013 12:38 PM, "ppaulvsk at aol.com" <ppaulvsk at aol.com> wrote: > Where I'm getting my measurements? from are from the AS5045 drawings.? Not > from the plans. The fwd center? spar caps are 2.16". Add the web material >? you come up with 2.253". This would be the same for the outboard? spar > also. The AS5045 outboard spar is .22"? wider.? So I think it would be best > to take it off from the outboard spar.? The AS5045 aft spars are only .193 > wider. I think I would shim there and not trim. > > Sent from my HTC on the Now Network from Sprint! > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options > _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
