Pat, Check my website and look for the parts tailextention. We did the 14 inch extention after the fuselage was finished, And did all the mods to let her listen to the name KR2-S. Stef
-- Stef and Ted are building the KR-2S see http://www.masttotaalconcept.nl/kr2 >----Origineel Bericht---- >Van : patrusso at myfairpoint.net >Datum : 20/10/2013 18:31 >Aan : krnet at list.krnet.org >Onderwerp : KR> Hinge points > >1- On my AT6 project I am about to fill in all of the hinge points with bits >of foam and glass. Not very exciting so am looking for suggestions or >alternative methods. And.... on another project; >2-I have an older KR boat abandoned by another builder and have decided to cut >it behind the seat and move/extend the fuselage rearwards by 24?. Has anyone >out there tried this? I am loathe to start anew because the boat has all the >controls and landing gear done. It really appears to be a mechanically simple >task though tedious and exacting. Comments welcome! >Pat http://www.flickr.com/photos/100112644 at N03/ >_______________________________________________ >Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. >To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org >please see other KRnet info at http://www.krnet.org/info.html >see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change >options >
