Measure twice cut once. It doesn't matter whether you understand the units, only whether you measured the requirements in those unit. Signing off on a cable order without measuring is an open invitation for failure.
BTW, I'm an American, and I understand Metric unit a lot better than I do the English units. How many inches are in a rod How many gills in a gallon? -- Shmuel (Seymour J.) Metz http://mason.gmu.edu/~smetz3 עַם יִשְׂרָאֵל חַי נֵ֣צַח יִשְׂרָאֵ֔ל לֹ֥א יְשַׁקֵּ֖ר ________________________________________ From: IBM Mainframe Discussion List <[email protected]> on behalf of Tom Brennan <[email protected]> Sent: Saturday, June 22, 2024 12:28 PM To: [email protected] Subject: Re: GRS in MONOPLEX without physical CTCs ? And don't do like I did a few years ago :) A co-worker ordered four 3-meter FICON cables for CTC connections from one card to another on the same machine. Since I'm American I don't really know how long a meter is so I said "sure". When I went on site, a couple of cables had to run from one side of the z13s to the other, and they barely made it by going under the frame - but still above the raised floor. A bit tacky. On 6/21/2024 11:44 PM, Brian Westerman wrote: > Ficon adapters and basic sysplex are far cheaper than MIM. Also, with MIM, > PDSe sharing is still not completely correct. At least not as of 2023. > > Brian > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
