All of the VTOC files that were not moved, are empty. The HMIG files are definitely not empty. There is mention of the HMIG files in the HSM logs
Gadi -----Original Message----- From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On Behalf Of Richard Marchant Sent: Monday, July 13, 2020 11:36 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Changing the volser of an HSM ML1 volume Gadi, FREEVOL should move these files if they are good. Check they are active files. Richard Marchant Johannesburg From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Gadi Ben-Avi Sent: Monday, July 13, 2020 10:20 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Changing the volser of an HSM ML1 volume Hi again, HSM copied many of the files on the old volume, but there are still some files left. The files are named HSM.VTOC.** and HSM.HMIG.** How do I tell HSM to copy these files too. Gadi -----Original Message----- From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU>> On Behalf Of Richard Marchant Sent: Monday, July 13, 2020 10:24 AM To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> Subject: Re: Changing the volser of an HSM ML1 volume Gadi, HSM should move all the files. Richard Marchant Johannesburg On Mon, Jul 13, 2020 at 8:43 AM Gadi Ben-Avi <gad...@malam.com<mailto:gad...@malam.com>> wrote: > Thanks > Will HSM move the files already on the old volume, or do I have to do > it myself? > > Gadi > > -----Original Message----- > From: IBM Mainframe Discussion List > <IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU>> On Behalf > Of Richard Marchant > Sent: Monday, July 13, 2020 9:18 AM > To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> > Subject: Re: Changing the volser of an HSM ML1 volume > > Gadi, > > I would advise you do the following so HSM knows what's where: > > HSEND ADDVOL newvolser UNIT(3390) MIGRATION(ML1 NODRAIN) > > HSEND ADDVOL oldvolser UNIT(3390) MIGRATION(DRAIN) > > HSEND FREEVOL MVOL(oldvolser) AGE(0) TARGETLEVEL(ML1) > > Once complete you can DELVOL the oldvolser. > > HTH > > Richard Marchant > Johannesburg > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of Gadi Ben-Avi > Sent: Monday, July 13, 2020 6:55 AM > To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> > Subject: Changing the volser of an HSM ML1 volume > > Hi, > I need to change the name of a HSM ML1 volume. > The volume only contains VTOC files created by backups. > > Can I just create a new volume, define it to hsm and move the files to it? > > Gadi > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu> > with the message: INFO IBM-MAIN > > This message is subject to certain restrictions and qualifications > which are contained in our email disclaimer which is available on our > website at > www.edcon.co.za/Edcon/Disclaimer<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fprotect-za.mimecast.com%2Fs%2FelxECmw0pDtJ7AxQsOtW4a&data=02%7C01%7Crmarchant%40edcon.co.za%7Cfb2ffedb171f4236164608d8270593c2%7C9bc1595a478a4774bd9e25f50e3a0119%7C0%7C0%7C637302252213342982&sdata=fSabl7FP%2FRTg8PXOY%2BHegsPSzZWKKry2DMSBQH0s8pM%3D&reserved=0> > or from the Group Secretary on (011) 495-6000. > The disclaimer also provides our corporate information and names of > our directors as required by law. > The disclaimer is deemed to form part of this message in terms of > Section > 11 of the Electronic Communications and Transactions Act, 2002. > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu> > with the message: INFO IBM-MAIN > > Email secured by Check Point > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu> > with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu> with the message: INFO IBM-MAIN Email secured by Check Point ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu> with the message: INFO IBM-MAIN This message is subject to certain restrictions and qualifications which are contained in our email disclaimer which is available on our website at www.edcon.co.za/Edcon/Disclaimer or from the Group Secretary on (011) 495-6000. The disclaimer also provides our corporate information and names of our directors as required by law. The disclaimer is deemed to form part of this message in terms of Section 11 of the Electronic Communications and Transactions Act, 2002. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Email secured by Check Point ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
