Gadi, Please execute the following command:
*HSEND AUDIT MEDCTL VOLUMES(ML1000) FIX* Richard Marchant Johannesburg On Mon, Jul 13, 2020 at 2:27 PM Gadi Ben-Avi <gad...@malam.com> wrote: > Hi Richard, > Enclosed is the output from the FREEVOL command. > This partition does not have any issues with HMIG files. > Gadi > > -----Original Message----- > From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On Behalf > Of Richard Marchant > Sent: Monday, July 13, 2020 3:20 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: Changing the volser of an HSM ML1 volume > > Gadi, > > Try running the FREEVOL again and then post the DFHSM log of the FREEVOL > output. > > Richard Marchant > Johannesburg > > On Mon, Jul 13, 2020 at 12:19 PM Gadi Ben-Avi <gad...@malam.com> wrote: > > > Hi Again, > > The VTOC records are newish. There are some from today and some from > > earlier in the year. > > The Migrated files seems to be OK. They were created because the > > storage group was defined with automigrate. > > I changed the storage group to not have automigrate, so no new files > > will be migrated. > > > > How can I move those files to the new volume? > > > > Gadi > > > > > > -----Original Message----- > > From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On > > Behalf Of Richard Marchant > > Sent: Monday, July 13, 2020 12:33 PM > > To: IBM-MAIN@LISTSERV.UA.EDU > > Subject: Re: Changing the volser of an HSM ML1 volume > > > > Gadi, > > > > How old are VTOC files? Are they required? > > > > Do the HMIG files have catalog entries and “D” records in the MCDS? > > > > To find the full datasetname for an HMIG file so you can check for a “D” > > record issue the following: > > > > HSEND FIXCDS A HMIGfilename > > > > Once you have the full datasetname you can then check if there is > > valid “D” record by issuing the following: > > > > HSEND FIXCDS D fulldatasetname > > > > If there is a “D” record try recalling the dataset. If this works you > > can delete the associated DFHSM “A” and “D” records. Then make an DFHSM > backup. > > > > If there is no “D” record you can do the following: > > > > > > 1. If the dataset is not too important delete the associated “A” > > record and delete the HMIG file on the ML1 volume. If you have a > > backup then restore the dataset. > > > > 2. If you have no backup and the dataset is important you can > > recreate the “D” record. Check the manuals for this procedure. Then > > recall it as above. > > HTH > > > > Richard Marchant > > Johannesburg > > > > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > > On Behalf Of Gadi Ben-Avi > > Sent: Monday, July 13, 2020 10:55 AM > > To: IBM-MAIN@LISTSERV.UA.EDU > > Subject: Re: Changing the volser of an HSM ML1 volume > > > > All of the VTOC files that were not moved, are empty. > > The HMIG files are definitely not empty. > > There is mention of the HMIG files in the HSM logs > > > > Gadi > > > > -----Original Message----- > > From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU<mailto: > > IBM-MAIN@LISTSERV.UA.EDU>> On Behalf Of Richard Marchant > > Sent: Monday, July 13, 2020 11:36 AM > > To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> > > Subject: Re: Changing the volser of an HSM ML1 volume > > > > Gadi, > > > > FREEVOL should move these files if they are good. > > > > Check they are active files. > > > > Richard Marchant > > Johannesburg > > > > > > > > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > > On Behalf Of Gadi Ben-Avi > > Sent: Monday, July 13, 2020 10:20 AM > > To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU> > > Subject: Re: Changing the volser of an HSM ML1 volume > > > > Hi again, > > HSM copied many of the files on the old volume, but there are still > > some files left. > > The files are named HSM.VTOC.** and HSM.HMIG.** How do I tell HSM to > > copy these files too. > > > > Gadi > > > > -----Original Message----- > > From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU<mailto: > > IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU% > > 3cmailto:IBM-MAIN@LISTSERV.UA.EDU>>> On Behalf Of Richard Marchant > > Sent: Monday, July 13, 2020 10:24 AM > > To: IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU<mailto: > > IBM-MAIN@LISTSERV.UA.EDU%3cmailto:IBM-MAIN@LISTSERV.UA.EDU>> > > Subject: Re: Changing the volser of an HSM ML1 volume > > > > Gadi, > > > > HSM should move all the files. > > > > Richard Marchant > > Johannesburg > > > > On Mon, Jul 13, 2020 at 8:43 AM Gadi Ben-Avi <gad...@malam.com<mailto: > > gad...@malam.com<mailto:gad...@malam.com%3cmailto:gad...@malam.com>>> > > wrote: > > > > > Thanks > > > Will HSM move the files already on the old volume, or do I have to > > > do it myself? > > > > > > Gadi > > > > > > -----Original Message----- > > > From: IBM Mainframe Discussion List > > > <IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM > > > -M a...@listserv.ua.edu%3cmailto:IBM-MAIN@LISTSERV.UA.EDU>>> On > > > Behalf Of Richard Marchant > > > Sent: Monday, July 13, 2020 9:18 AM > > > To: > > > IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM- > > > MA i...@listserv.ua.edu%3cmailto:IBM-MAIN@LISTSERV.UA.EDU>> > > > Subject: Re: Changing the volser of an HSM ML1 volume > > > > > > Gadi, > > > > > > I would advise you do the following so HSM knows what's where: > > > > > > HSEND ADDVOL newvolser UNIT(3390) MIGRATION(ML1 NODRAIN) > > > > > > HSEND ADDVOL oldvolser UNIT(3390) MIGRATION(DRAIN) > > > > > > HSEND FREEVOL MVOL(oldvolser) AGE(0) TARGETLEVEL(ML1) > > > > > > Once complete you can DELVOL the oldvolser. > > > > > > HTH > > > > > > Richard Marchant > > > Johannesburg > > > > > > -----Original Message----- > > > From: IBM Mainframe Discussion List > > > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Gadi Ben-Avi > > > Sent: Monday, July 13, 2020 6:55 AM > > > To: > > > IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM-MAIN@LISTSERV.UA.EDU<mailto:IBM- > > > MA i...@listserv.ua.edu%3cmailto:IBM-MAIN@LISTSERV.UA.EDU>> > > > Subject: Changing the volser of an HSM ML1 volume > > > > > > Hi, > > > I need to change the name of a HSM ML1 volume. > > > The volume only contains VTOC files created by backups. > > > > > > Can I just create a new volume, define it to hsm and move the files > > > to > > it? > > > > > > Gadi > > > > > > -------------------------------------------------------------------- > > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > > send email to > > > lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu<mailto:list > > > se r...@listserv.ua.edu%3cmailto:lists...@listserv.ua.edu>> > > > with the message: INFO IBM-MAIN > > > > > > This message is subject to certain restrictions and qualifications > > > which are contained in our email disclaimer which is available on > > > our website at www.edcon.co.za/Edcon/Disclaimer< > > https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fprot > > ect-za.mimecast.com%2Fs%2F1aPPCQ1KpPtAKJoyIMtuNl&data=02%7C01%7Crmarch > > ant%40edcon.co.za%7Cd9fd717edd0849b6eecc08d8270a8066%7C9bc1595a478a477 > > 4bd9e25f50e3a0119%7C0%7C0%7C637302273376370686&sdata=HX%2BWuz%2FEtkBn9 > > 32wl4XubJ7%2FdPr5MynLCdPjXMDgYME%3D&reserved=0 > > >< > > https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fprot > > ect-za.mimecast.com%2Fs%2FelxECmw0pDtJ7AxQsOtW4a&data=02%7C01%7Crmarch > > ant%40edcon.co.za%7Cfb2ffedb171f4236164608d8270593c2%7C9bc1595a478a477 > > 4bd9e25f50e3a0119%7C0%7C0%7C637302252213342982&sdata=fSabl7FP%2FRTg8PX > > OY%2BHegsPSzZWKKry2DMSBQH0s8pM%3D&reserved=0 > > < > > https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fprot > > ect-za.mimecast.com%2Fs%2FmyBRCRgKqQTmpy5zhOSIlU&data=02%7C01%7Crmarch > > ant%40edcon.co.za%7Cd9fd717edd0849b6eecc08d8270a8066%7C9bc1595a478a477 > > 4bd9e25f50e3a0119%7C0%7C0%7C637302273376370686&sdata=7rCyEmFCHqurfrdNh > > 4K67R2TzKriFa5AM4%2F31e2Y1mE%3D&reserved=0>> > > or from the Group Secretary on (011) 495-6000. > > > The disclaimer also provides our corporate information and names of > > > our directors as required by law. > > > The disclaimer is deemed to form part of this message in terms of > > > Section > > > 11 of the Electronic Communications and Transactions Act, 2002. > > > > > > -------------------------------------------------------------------- > > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > > send email to > > > lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu<mailto:list > > > se r...@listserv.ua.edu%3cmailto:lists...@listserv.ua.edu>> > > > with the message: INFO IBM-MAIN > > > > > > Email secured by Check Point > > > > > > -------------------------------------------------------------------- > > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > > send email to > > > lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu<mailto:list > > > se r...@listserv.ua.edu%3cmailto:lists...@listserv.ua.edu>> > > > with the message: INFO IBM-MAIN > > > > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, send > > email to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu > <mailto: > > lists...@listserv.ua.edu%3cmailto:lists...@listserv.ua.edu>> with the > > message: INFO IBM-MAIN > > > > Email secured by Check Point > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, send > > email to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu > <mailto: > > lists...@listserv.ua.edu%3cmailto:lists...@listserv.ua.edu>> with the > > message: INFO IBM-MAIN > > > > This message is subject to certain restrictions and qualifications > > which are contained in our email disclaimer which is available on our > > website at www.edcon.co.za/Edcon/Disclaimer< > > https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fprot > > ect-za.mimecast.com%2Fs%2F1aPPCQ1KpPtAKJoyIMtuNl&data=02%7C01%7Crmarch > > ant%40edcon.co.za%7Cd9fd717edd0849b6eecc08d8270a8066%7C9bc1595a478a477 > > 4bd9e25f50e3a0119%7C0%7C0%7C637302273376380680&sdata=mW5P%2F0a7rHiBgIk > > 9MhWLHyfaCv4S%2Bdg3rddyQlTJZx4%3D&reserved=0> > > or from the Group Secretary on (011) 495-6000. > > The disclaimer also provides our corporate information and names of > > our directors as required by law. > > The disclaimer is deemed to form part of this message in terms of > > Section > > 11 of the Electronic Communications and Transactions Act, 2002. > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, send > > email to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu> > > with the > > message: INFO IBM-MAIN > > > > > > Email secured by Check Point > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, send > > email to lists...@listserv.ua.edu<mailto:lists...@listserv.ua.edu> > > with the > > message: INFO IBM-MAIN > > > > This message is subject to certain restrictions and qualifications > > which are contained in our email disclaimer which is available on our > > website at www.edcon.co.za/Edcon/Disclaimer or from the Group > > Secretary on (011) 495-6000. > > The disclaimer also provides our corporate information and names of > > our directors as required by law. > > The disclaimer is deemed to form part of this message in terms of > > Section > > 11 of the Electronic Communications and Transactions Act, 2002. > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, send > > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > > > Email secured by Check Point > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, send > > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email > to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > Email secured by Check Point > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
