Hugin can create a mosaic from any number of photos, and it doesn't really matter which image you use as the 'anchor'. I used the middle image as an anchor because with all the position parameters set to zero it will then be in the middle of the output image. Your fourth photo will extend the view at the bottom, but you can always use the Fit and Crop functions to reframe the output.
One thing I didn't try, because it looked like your photos were straight-on without any perspective distortion, is to also optimise yaw and pitch for the anchor. This might give a slightly better output, but your subject isn't very flat so it could give weird results. -- Bruno On Sun, 23 Mar 2025, 12:00 Nick Thomas wrote: > "Ask if you have any more questions, this is a good demonstration of the > mosaic mode in Hugin. > > A dangerous thing to say! > > Thanks for your instructions. I worked my way through it and saw what you > had done. > > I started with three images, but there is a fourth, which is the foot of > the stone. I can see why you fixed the centre image in the set of three and > adjusted the positions of the others. What should I do with four images? > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/hugin-ptx/CAJV99ZgK-_EfZ%3DqyFnnVa0S9R_t7%3DOtbDVm%3DKrRH5hPGceqxHQ%40mail.gmail.com.
