Hi T. Modes, thank you for the quick answer. Attached the .pto-file As a conclusion of how I worked in both operating systems, I strictly followed the Hugin tutorial - "Stitching flat scanned images". The big difference in the macOS version is that with autopano-sift-C the control points were created automatically, in the Win version no control points were created by itself. That would be again a next question in a separate thread, how that could work. Although no control points had been created under Win, after the "Stitch now!" command the same error message as under macOS.
Sorry, with attached .pto file I can not post here ?! Thank you, best regards T. Modes schrieb am Sonntag, 28. Februar 2021 um 08:28:31 UTC+1: > Kai Mewes schrieb am Samstag, 27. Februar 2021 um 22:03:12 UTC+1: > >> As additional info, I could not do the "quick panorama preview", because >> under the tabs "Assistant", "Preview", "Projection", "Move/Drag" and "Crop" >> only an empty window with grid without images appears, but the control >> points are pointed out in the upper right corner as follows: >> "The images are connected with 599 control points. Mean error after >> optimization: 0.0 pixels, max 0.0". >> > > 599 control points with max error of 0 sound very suspicious. Also that > image is displayed. There is probably something went wrong during > optimisation. Can you provide the pto file? Otherwise it is very difficult > to say. > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/a7219f93-c806-4958-b453-f221796b88e6n%40googlegroups.com.
