and here is the crash report. what should I do with it?
On Sat, Oct 10, 2026 at 6:34 PM Julie G <[email protected]> wrote: > sigh... ok then what i did next is... try to go > here: (Menu->Administration->System Information then select the tab Crash > Reports. I wonder why when i go to menu and type administration, I get > nothing? So when I type system info i get a gears icon. clicking on that, > i do not get any tabs and so no option for crash reports. i do get system > info, which is this: > > System: > Kernel: 7.0.0-38-generic arch: x86_64 bits: 64 compiler: gcc v: 13.3.0 > clocksource: tsc > Desktop: Cinnamon v: 6.4.14 tk: GTK v: 3.24.41 wm: Muffin v: 6.4.1 vt: 7 > dm: LightDM v: 1.30.0 > Distro: Linux Mint 22.2 Zara base: Ubuntu 24.04 noble > Machine: > Type: Desktop System: Dell product: Inspiron 580 v: N/A serial: > <superuser required> Chassis: > type: 3 serial: <superuser required> > Mobo: Dell model: 0C2KJT v: A00 serial: <superuser required> uuid: > <superuser required> > BIOS: Dell v: A07 date: 11/13/2010 > CPU: > Info: dual core model: Intel Core i3 550 bits: 64 type: MT MCP smt: > enabled arch: Westmere rev: 5 > cache: L1: 128 KiB L2: 512 KiB L3: 4 MiB > Speed (MHz): avg: 1197 min/max: 1200/3200 cores: 1: 1197 2: 1197 3: 1197 > 4: 1197 > bogomips: 25535 > Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx > Graphics: > Device-1: NVIDIA GT218 [GeForce 210] vendor: Micro-Star MSI driver: > nouveau v: kernel arch: Tesla > pcie: speed: 2.5 GT/s lanes: 16 ports: active: DVI-I-1,VGA-1 empty: > HDMI-A-1 bus-ID: 01:00.0 > chip-ID: 10de:0a65 class-ID: 0300 temp: 39.0 C > Device-2: Logitech Webcam C260 driver: snd-usb-audio,uvcvideo type: USB > rev: 2.0 > speed: 480 Mb/s lanes: 1 bus-ID: 2-1.1.2:5 chip-ID: 046d:081a > class-ID: 0102 serial: <filter> > Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: > X: loaded: modesetting > unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0 screens: > 1 > Screen-1: 0 s-res: 2720x1024 s-dpi: 96 s-size: 719x270mm (28.31x10.63") > s-diag: 768mm (30.24") > Monitor-1: DVI-I-1 pos: primary,bottom-r model: ViewSonic VX1935wm > serial: <filter> > res: 1440x900 hz: 60 dpi: 90 size: 408x255mm (16.06x10.04") diag: > 481mm (18.9") modes: > max: 1440x900 min: 720x400 > Monitor-2: VGA-1 pos: top-left model: Dell 1908FP serial: <filter> res: > 1280x1024 hz: 60 > dpi: 86 size: 376x301mm (14.8x11.85") diag: 482mm (19") modes: max: > 1280x1024 min: 720x400 > API: EGL v: 1.5 hw: drv: nvidia nouveau platforms: device: 0 drv: > nouveau device: 1 drv: swrast > gbm: drv: nouveau surfaceless: drv: nouveau x11: drv: nouveau > inactive: wayland > API: OpenGL v: 4.5 compat-v: 3.3 vendor: mesa v: 25.2.8-0ubuntu0.24.04.4 > glx-v: 1.4 > direct-render: yes renderer: NVA8 device-ID: 10de:0a65 > Audio: > Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: Dell > 5 driver: snd_hda_intel > v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3b56 class-ID: 0403 > Device-2: NVIDIA High Definition Audio vendor: Micro-Star MSI driver: > snd_hda_intel v: kernel > pcie: speed: 2.5 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:0be3 > class-ID: 0403 > Device-3: Logitech Webcam C260 driver: snd-usb-audio,uvcvideo type: USB > rev: 2.0 > speed: 480 Mb/s lanes: 1 bus-ID: 2-1.1.2:5 chip-ID: 046d:081a > class-ID: 0102 serial: <filter> > API: ALSA v: k7.0.0-38-generic status: kernel-api > Server-1: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse > status: active > 2: wireplumber status: active 3: pipewire-alsa type: plugin > Network: > Device-1: Broadcom NetLink BCM57788 Gigabit Ethernet PCIe vendor: Dell > driver: tg3 v: kernel > pcie: speed: 2.5 GT/s lanes: 1 port: N/A bus-ID: 03:00.0 chip-ID: > 14e4:1691 class-ID: 0200 > IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter> > Drives: > Local Storage: total: 1.37 TiB used: 68.17 GiB (4.9%) > ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB > speed: 3.0 Gb/s > tech: SSD serial: <filter> fw-rev: 4B6Q scheme: GPT > ID-2: /dev/sdb vendor: Samsung model: SSD 870 EVO 1TB size: 931.51 GiB > speed: 3.0 Gb/s > tech: SSD serial: <filter> fw-rev: 2B6Q scheme: GPT > ID-3: /dev/sdg model: Flash Drive SM USB20 size: 7.47 GiB type: USB rev: > 2.0 spd: 480 Mb/s > lanes: 1 tech: SSD serial: <filter> fw-rev: 1100 scheme: MBR > Partition: > ID-1: / size: 456.88 GiB used: 68.15 GiB (14.9%) fs: ext4 dev: /dev/sda3 > ID-2: /boot/efi size: 512 MiB used: 6.1 MiB (1.2%) fs: vfat dev: > /dev/sda2 > Swap: > ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -1 > file: /swapfile > USB: > Hub-1: 1-0:1 info: full speed or root hub ports: 2 rev: 2.0 speed: 480 > Mb/s lanes: 1 > chip-ID: 1d6b:0002 class-ID: 0900 > Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0 > speed: 480 Mb/s > lanes: 1 chip-ID: 8087:0020 class-ID: 0900 > Device-1: 1-1.2:3 info: Fitipower Integrated Mass Storage Device type: > mass storage > driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s lanes: 1 > power: 250mA > chip-ID: 18e3:9106 class-ID: 0806 serial: <filter> > Device-2: 1-1.4:4 info: Canon CanoScan LiDE 210 type: <vendor specific> > driver: N/A > interfaces: 1 rev: 2.0 speed: 480 Mb/s lanes: 1 power: 500mA chip-ID: > 04a9:190a class-ID: ff00 > Hub-3: 2-0:1 info: full speed or root hub ports: 2 rev: 2.0 speed: 480 > Mb/s lanes: 1 > chip-ID: 1d6b:0002 class-ID: 0900 > Hub-4: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0 > speed: 480 Mb/s > lanes: 1 chip-ID: 8087:0020 class-ID: 0900 > Hub-5: 2-1.1:3 info: Microchip (formerly SMSC) Hub ports: 4 rev: 2.0 > speed: 480 Mb/s lanes: 1 > power: 2mA chip-ID: 0424:2504 class-ID: 0900 > Device-1: 2-1.1.2:5 info: Logitech Webcam C260 type: video,audio driver: > snd-usb-audio,uvcvideo > interfaces: 4 rev: 2.0 speed: 480 Mb/s lanes: 1 power: 500mA chip-ID: > 046d:081a class-ID: 0102 > serial: <filter> > Hub-6: 2-1.3:4 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s > lanes: 1 power: 100mA > chip-ID: 1a40:0101 class-ID: 0900 > Device-1: 2-1.3.1:6 info: Dell QuietKey Keyboard type: keyboard driver: > hid-generic,usbhid > interfaces: 1 rev: 1.1 speed: 1.5 Mb/s lanes: 1 power: 70mA chip-ID: > 413c:2106 class-ID: 0301 > Device-2: 2-1.3.2:7 info: Silicon Motion - Taiwan (formerly Feiya ) > Flash Drive > type: mass storage driver: usb-storage interfaces: 1 rev: 2.0 speed: > 480 Mb/s lanes: 1 > power: 100mA chip-ID: 090c:1000 class-ID: 0806 serial: <filter> > Device-3: 2-1.3.3:8 info: Primax HP Optical Mouse type: mouse driver: > hid-generic,usbhid > interfaces: 1 rev: 2.0 speed: 1.5 Mb/s lanes: 1 power: 98mA chip-ID: > 0461:4d0f class-ID: 0301 > Device-4: 2-1.3.4:9 info: HP HP LaserJet CP1025nw type: printer driver: > usblp interfaces: 2 > rev: 2.0 speed: 480 Mb/s lanes: 1 power: 98mA chip-ID: 03f0:0b2a > class-ID: 0701 serial: <filter> > Hub-7: 3-0:1 info: full speed or root hub ports: 4 rev: 2.0 speed: 480 > Mb/s lanes: 1 > chip-ID: 1d6b:0002 class-ID: 0900 > Hub-8: 4-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: 12 > Mb/s lanes: 1 > chip-ID: 1d6b:0001 class-ID: 0900 > Hub-9: 5-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: 12 > Mb/s lanes: 1 > chip-ID: 1d6b:0001 class-ID: 0900 > Sensors: > System Temperatures: cpu: 41.0 C mobo: N/A gpu: nouveau temp: 39.0 C > Fan Speeds (rpm): cpu: 974 fan-2: 814 > Repos: > Packages: 2628 pm: dpkg pkgs: 2616 pm: flatpak pkgs: 12 > No active apt repos in: /etc/apt/sources.list > Active apt repos in: /etc/apt/sources.list.d/element-io.list > 1: deb [signed-by=/usr/share/keyrings/element-io-archive-keyring.gpg] > https: //packages.element.io/debian/ default main > Active apt repos in: > /etc/apt/sources.list.d/official-package-repositories.list > 1: deb http: //packages.linuxmint.com zara main upstream import > backport > 2: deb http: //archive.ubuntu.com/ubuntu noble main restricted > universe multiverse > 3: deb http: //archive.ubuntu.com/ubuntu noble-updates main > restricted universe multiverse > 4: deb http: //archive.ubuntu.com/ubuntu noble-backports main > restricted universe multiverse > 5: deb http: //security.ubuntu.com/ubuntu/ noble-security main > restricted universe multiverse > Active apt repos in: /etc/apt/sources.list.d/google-chrome.sources > 1: deb [arch=amd64] https: //dl.google.com/linux/chrome-stable/deb/ > stable main > Active apt repos in: /etc/apt/sources.list.d/vivaldi.sources > 1: deb [arch=amd64] https: //repo.vivaldi.com/stable/deb/ stable main > Info: > Memory: total: 12 GiB note: est. available: 9.57 GiB used: 5.36 GiB > (56.0%) > Processes: 278 Power: uptime: 18m states: freeze,mem,disk suspend: deep > wakeups: 0 > hibernate: platform Init: systemd v: 255 target: graphical (5) > default: graphical > Compilers: gcc: 13.3.0 Client: Cinnamon v: 6.4.14 inxi: 3.3.34 > > > On Sat, Oct 10, 2026 at 6:29 PM Julie G <[email protected]> wrote: > >> ok i am going to try what you are suggesting. it is amazing for me to >> think that you people on the mailing list can successfully troubleshoot >> these issues i find mysterious simply through the words i give you. >> smh!!! >> >> similarly, it might take us a few back and forths (sadly!) to get the >> right info. i ran the command >> "/run/user/1000/.flatpak/org.gnucash.GnuCash/tmp/gnucash.trace" at a >> terminal and it returned the response "bash: >> /run/user/1000/.flatpak/org.gnucash.GnuCash/tmp/gnucash.trace: No such file >> or directory". I checked to make sure my number was 1000 and it is. >> >> not knowing what else to do, I ran the other command, "flatpak run >> org.gnucash.GnuCash --debug --log "gnc=info". i got nothing but a carat >> >. what now? >> >> >> On Sat, Oct 10, 2026 at 6:06 PM David Cousens <[email protected]> >> wrote: >> >>> Julie , >>> >>> There is no need to be scared. In many cases the suggested commands >>> from the AI will help but they don't always work if your system varies from >>> whatever the AI got its information from. The main thing is to be wary of >>> any commands which ask you to delete files from system areas on your >>> computer (generally anything other than your home directory or where you >>> need sudo permissions to delete stuff). The GTK inspector is not really >>> necessary to get a trace dump for a crash. Flatpak makes it a bit harder >>> than in the straight Linux Mint environment because it isolates the >>> application from the operating system which has some advantages in that >>> your operating system installation is better protected with the >>> disadvantage that accessing information is a bit more convoluted >>> >>> gdb is the gnu debug tool. It allows you to execute a program one line >>> at a time which is useful in tracking down exactly where in the code a >>> particular problem is occurring. It and the GTK inspector are not really >>> user space tools but are more intended for use by developers. GTK is a >>> library used to construct the display windows and tabs in GnuCash. >>> >>> A stack trace tells developers exactly what code was executing when the >>> operating system or a program being run on it crashes. The procedure is a >>> little different for system crashes and program crashes although a program >>> problem is frequently the source of system crashes. >>> >>> Linux Mint automatically generates crash reports if the system crashes. >>> You can access them from the menu (Menu->Administration->System Information >>> then select the tab Crash Reports. If a crash has occurred there will be >>> information about it-a stack trace. The pastebin button will copy and >>> store that information to a specific location somewhere on the internet and >>> give you a link to that location which you can then copy and paste into >>> emails, bug reports etc. >>> >>> For a crash in a program i.e. usually the program is unresponsive but >>> your computer can still be accessed and other applications are still >>> responsive. The general procedure uses the gdb program but that is less >>> useful for flatpak versions. GnuCash also has some internal debugging which >>> is generated when it is started with a "--debug" switch on the command line >>> and it creates its own execution trace file as it runs. >>> >>> You should be able to access the tracefile created when your GnuCash >>> program was last run using >>> the command >>> "/run/user/1000/.flatpak/org.gnucash.GnuCash/tmp/gnucash.trace" at a >>> terminal. AFAIK that will copy the tracefile to your terminal and you can >>> then copy and paste from the terminal to an email for example. >>> >>> You may need to replace the number 1000 in that command with your user >>> id on your system. You find that by using the command "id -u" at the >>> terminal prompt and if the number it returns is different from 1000 >>> (usually isn't unless your system has multiple users) substitute the >>> returned number for 1000 in the above command. >>> >>> If the original trace file from when it last crashed is missing or has >>> been overwritten by running GnuCash again since and you know the steps >>> which lead to it crashing you can run GnuCash in debug mode with the >>> following command at a terminal >>> flatpak run org.gnucash.GnuCash --debug --log "gnc=info", >>> >>> reproduce the crash and then access the gnucash trace file as above. If >>> a crash can't be reproduced, then it will be very difficult if not near >>> impossible to track the problem downand it is generally better to wait >>> until the problem becomes reproducible. >>> >>> It sometimes takes a bit of time for people on the mailing list to work >>> out what your level of understanding of computers/programming etc is and >>> once they do most of us will try to pitch replies at an appropriate level. >>> >>> On Sat, 2026-10-10 at 16:09 -0700, Julie G wrote: >>> >>> David et. al., >>> >>> this is scary. I am looking at the wiki and it's mostly all a bunch of >>> gobbledygook to me. I did a control f for "debug" and found 4 instances. >>> One says: >>> Crash: Stacktrace >>> >>> Flatpak Debugging <https://docs.flatpak.org/en/latest/debugging.html> >>> has instructions for running gdb in a flatpak round out the gdb >>> instructions in Stack_Trace <https://wiki.gnucash.org/wiki/Stack_Trace>. >>> An alternative if you have systemd-coredump installed (it's there by >>> default in Fedora 28 and later) you can use flathub-coredumpctl >>> <https://www.figuiere.net/technotes/notes/tn001/> to easily generate a >>> stack trace (in gdb where and bt are synonyms). Gnome's Michael >>> Catanzaro has a nice explanation >>> <https://blogs.gnome.org/mcatanzaro/2021/09/18/creating-quality-backtraces-for-crash-reports/> >>> of making a good stack trace for bug reports. >>> GTK Inspector >>> >>> flatpak run --env=GTK_DEBUG=interactive org.gnucash.GnuCash >>> >>> ...I take this to mean there is a slim chance that i could copy the >>> immediate above, go to terminal and paste it there, and it would do >>> something. >>> >>> Dang it, when I try, I get the following: >>> Failed to load module "xapp-gtk3-module" >>> >>> i will poke around and keep trying, but i feel lost and scared :-( >>> >>> thanks for trying to help! >>> >>> julie >>> >>> On Thu, Oct 8, 2026 at 9:25 PM David Cousens <[email protected]> >>> wrote: >>> >>> Julie, >>> >>> The Wiki has some info on running and debugging the flatpak version of >>> GnuCash >>> https://wiki.gnucash.org/wiki/Flatpak >>> >>> On Thu, 2026-10-08 at 18:40 -0700, Julie G wrote: >>> >>> and yes, David, that was it. Probably for similar reasons, one >>> transaction was doubly entered, which caused the original discrepancy. >>> Somewherer along the way, something else got wonky. In the absence of a >>> reconciliation report (the bug issue still needs my attention), I manually >>> looked through the transactions and found the errors. >>> >>> Now I am in bug report 799816 and it says... chconnor tried ...like, the >>> command "gnucash --debug --extra logto /tmp/gnucash.trace" >>> what does that do? typing that into terminal didn't work. I don't know >>> how to access flatpak sandbox. >>> i tried typing gnucash.trace into terminal, that didn't work either. I >>> am frightfully ignorant about how to do Stuff. I could look for a $ cat >>> /tmp/gnucash.trace but didn't find it in the file folders.... >>> >>> searched for gnucash.trace in the help, no matching help pages found. >>> >>> HMMM. Please advise if you are so inclined... >>> >>> Thanks! >>> >>> j >>> >>> On Thu, Oct 8, 2026 at 5:27 PM Julie G <[email protected]> wrote: >>> >>> ohhh, this is possibly really good. I have been wondering about >>> transactions which fall on the other side of a cutoff date or something. i >>> am chasing this down; one transaction did not get included in the .csv file >>> I made that was included in the statement, but it does not resolve the >>> issue, it simply alters it. However, last month I DID reconcile >>> successfully. I also did look for the unreconciled transaction to show up >>> in either the debit or credit panes to no avail yet. But, it MUST be >>> something like this. I feel like such a detective. Thank YOU for the >>> clue/boost! >>> >>> Julie >>> >>> On Wed, Oct 7, 2026 at 12:54 AM David Cousens <[email protected]> >>> wrote: >>> >>> Julie, >>> >>> If a starting balance is off after a previous reconciliation being >>> correct a possible problem is a transaction having been entered with a >>> date in a previous period. This can occur with incorrect entry of a >>> year for example. An amount like $1.44 could be something like a bank >>> fee if there is no other transaction matching the amount. An >>> unreconciled transaction in a previous period should show up in either >>> the debit or credit panes at the top when you open the reconciliation >>> window. >>> >>> On Tue, 2026-10-06 at 23:51 -0700, Julie G wrote: >>> > Hey all, >>> > >>> > I am running version 5.17, flathub 5.17 on linux mint. >>> > It is perplexing to me that I balance each account every month and it >>> > all >>> > seems great. A month goes by and when I go to do it again, it is >>> > always my >>> > fear that the starting balance will be off. Why ever for would this >>> > be, if >>> > I reconciled to 0.00 the previous month? What a horrible question. >>> > So >>> > let's try a better one... >>> > >>> > I try to investigate by doing the normal things; see if all the >>> > transactions were entered... I missed one and added it. But I was >>> > off $12 >>> > and change, and the transaction that didn't make the cut (it was on >>> > the >>> > date cusp and was just missed) was for $11 and change. Now I am off >>> > $1.44. So I went to reports/reconciliation and the tab it brought up >>> > was >>> > empty. next I looked around in the help and did not find anything. >>> > Next I >>> > started this email and while composing, I tried pulling up >>> > reports/reconciliation to accurately recount my steps. The tab came >>> > up >>> > empty again, and the computer froze. I had to alt+sysRq "REISUB" to >>> > jolt >>> > it out of the freeze; I don't know what else to do (which is maybe a >>> > different question). Meanwhile, I don't know how to figure out why >>> > I'm >>> > $1.44 off because I don't know how to verify that my previous >>> > reconciliation is all correct. >>> > I will add, however, that until this point I had been MARVELING how >>> > much I >>> > LOVE gnucash (and I still do) and how EASY it has been to reconcie >>> > and how >>> > little time it takes me. Wonderful when things just go right! but >>> > with >>> > all good things, they don't always go that well. The good news is, >>> > they go >>> > that well often enough that I'm SO happy I switched to Linux and to >>> > GNUCASH. I hope it's a glitch and that it can be figured out! >>> > >>> > Thanks in advance; let me know if I am missing some info. >>> > >>> > Julie >>> > ps. Here's my system info: >>> > System: >>> > Kernel: 7.0.0-38-generic arch: x86_64 bits: 64 compiler: gcc v: >>> > 13.3.0 >>> > clocksource: tsc >>> > Desktop: Cinnamon v: 6.4.14 tk: GTK v: 3.24.41 wm: Muffin v: 6.4.1 >>> > vt: 7 >>> > dm: LightDM v: 1.30.0 >>> > Distro: Linux Mint 22.2 Zara base: Ubuntu 24.04 noble >>> > Machine: >>> > Type: Desktop System: Dell product: Inspiron 580 v: N/A serial: >>> > <superuser required> Chassis: >>> > type: 3 serial: <superuser required> >>> > Mobo: Dell model: 0C2KJT v: A00 serial: <superuser required> uuid: >>> > <superuser required> >>> > BIOS: Dell v: A07 date: 11/13/2010 >>> > CPU: >>> > Info: dual core model: Intel Core i3 550 bits: 64 type: MT MCP smt: >>> > enabled arch: Westmere rev: 5 >>> > cache: L1: 128 KiB L2: 512 KiB L3: 4 MiB >>> > Speed (MHz): avg: 1197 high: 1199 min/max: 1200/3200 cores: 1: 1197 >>> > 2: >>> > 1198 3: 1199 4: 1197 >>> > bogomips: 25537 >>> > Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx >>> > Graphics: >>> > Device-1: NVIDIA GT218 [GeForce 210] vendor: Micro-Star MSI driver: >>> > nouveau v: kernel arch: Tesla >>> > pcie: speed: 2.5 GT/s lanes: 16 ports: active: DVI-I-1,VGA-1 >>> > empty: >>> > HDMI-A-1 bus-ID: 01:00.0 >>> > chip-ID: 10de:0a65 class-ID: 0300 temp: 40.0 C >>> > Device-2: Logitech Webcam C260 driver: snd-usb-audio,uvcvideo type: >>> > USB >>> > rev: 2.0 >>> > speed: 480 Mb/s lanes: 1 bus-ID: 1-1.1.2:5 chip-ID: 046d:081a >>> > class-ID: >>> > 0102 serial: <filter> >>> > Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 >>> > driver: X: >>> > loaded: modesetting >>> > unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0 >>> > screens: 1 >>> > Screen-1: 0 s-res: 2720x1024 s-dpi: 96 s-size: 719x270mm >>> > (28.31x10.63") >>> > s-diag: 768mm (30.24") >>> > Monitor-1: DVI-I-1 pos: primary,bottom-r model: ViewSonic VX1935wm >>> > serial: <filter> >>> > res: 1440x900 hz: 60 dpi: 90 size: 408x255mm (16.06x10.04") diag: >>> > 481mm >>> > (18.9") modes: >>> > max: 1440x900 min: 720x400 >>> > Monitor-2: VGA-1 pos: top-left model: Dell 1908FP serial: <filter> >>> > res: >>> > 1280x1024 hz: 60 >>> > dpi: 86 size: 376x301mm (14.8x11.85") diag: 482mm (19") modes: >>> > max: >>> > 1280x1024 min: 720x400 >>> > API: EGL v: 1.5 hw: drv: nvidia nouveau platforms: device: 0 drv: >>> > nouveau >>> > device: 1 drv: swrast >>> > gbm: drv: nouveau surfaceless: drv: nouveau x11: drv: nouveau >>> > inactive: >>> > wayland >>> > API: OpenGL v: 4.5 compat-v: 3.3 vendor: mesa v: 25.2.8- >>> > 0ubuntu0.24.04.4 >>> > glx-v: 1.4 >>> > direct-render: yes renderer: NVA8 device-ID: 10de:0a65 >>> > Audio: >>> > Device-1: Intel 5 Series/3400 Series High Definition Audio vendor: >>> > Dell 5 >>> > driver: snd_hda_intel >>> > v: kernel bus-ID: 00:1b.0 chip-ID: 8086:3b56 class-ID: 0403 >>> > Device-2: NVIDIA High Definition Audio vendor: Micro-Star MSI >>> > driver: >>> > snd_hda_intel v: kernel >>> > pcie: speed: 2.5 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: >>> > 10de:0be3 >>> > class-ID: 0403 >>> > Device-3: Logitech Webcam C260 driver: snd-usb-audio,uvcvideo type: >>> > USB >>> > rev: 2.0 >>> > speed: 480 Mb/s lanes: 1 bus-ID: 1-1.1.2:5 chip-ID: 046d:081a >>> > class-ID: >>> > 0102 serial: <filter> >>> > API: ALSA v: k7.0.0-38-generic status: kernel-api >>> > Server-1: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse >>> > status: active >>> > 2: wireplumber status: active 3: pipewire-alsa type: plugin >>> > Network: >>> > Device-1: Broadcom NetLink BCM57788 Gigabit Ethernet PCIe vendor: >>> > Dell >>> > driver: tg3 v: kernel >>> > pcie: speed: 2.5 GT/s lanes: 1 port: N/A bus-ID: 03:00.0 chip-ID: >>> > 14e4:1691 class-ID: 0200 >>> > IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter> >>> > Drives: >>> > Local Storage: total: 1.37 TiB used: 66.3 GiB (4.7%) >>> > ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO 500GB size: >>> > 465.76 GiB >>> > speed: 3.0 Gb/s >>> > tech: SSD serial: <filter> fw-rev: 4B6Q scheme: GPT >>> > ID-2: /dev/sdb vendor: Samsung model: SSD 870 EVO 1TB size: 931.51 >>> > GiB >>> > speed: 3.0 Gb/s >>> > tech: SSD serial: <filter> fw-rev: 2B6Q scheme: GPT >>> > ID-3: /dev/sdg model: Flash Drive SM USB20 size: 7.47 GiB type: USB >>> > rev: >>> > 2.0 spd: 480 Mb/s >>> > lanes: 1 tech: SSD serial: <filter> fw-rev: 1100 scheme: MBR >>> > Partition: >>> > ID-1: / size: 456.88 GiB used: 66.28 GiB (14.5%) fs: ext4 dev: >>> > /dev/sda3 >>> > ID-2: /boot/efi size: 512 MiB used: 6.1 MiB (1.2%) fs: vfat dev: >>> > /dev/sda2 >>> > Swap: >>> > ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -1 >>> > file: >>> > /swapfile >>> > USB: >>> > Hub-1: 1-0:1 info: full speed or root hub ports: 2 rev: 2.0 speed: >>> > 480 >>> > Mb/s lanes: 1 >>> > chip-ID: 1d6b:0002 class-ID: 0900 >>> > Hub-2: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: >>> > 2.0 >>> > speed: 480 Mb/s >>> > lanes: 1 chip-ID: 8087:0020 class-ID: 0900 >>> > Hub-3: 1-1.1:3 info: Microchip (formerly SMSC) Hub ports: 4 rev: >>> > 2.0 >>> > speed: 480 Mb/s lanes: 1 >>> > power: 2mA chip-ID: 0424:2504 class-ID: 0900 >>> > Device-1: 1-1.1.2:5 info: Logitech Webcam C260 type: video,audio >>> > driver: >>> > snd-usb-audio,uvcvideo >>> > interfaces: 4 rev: 2.0 speed: 480 Mb/s lanes: 1 power: 500mA >>> > chip-ID: >>> > 046d:081a class-ID: 0102 >>> > serial: <filter> >>> > Hub-4: 1-1.3:4 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s >>> > lanes: 1 power: 100mA >>> > chip-ID: 1a40:0101 class-ID: 0900 >>> > Device-1: 1-1.3.1:6 info: Dell QuietKey Keyboard type: keyboard >>> > driver: >>> > hid-generic,usbhid >>> > interfaces: 1 rev: 1.1 speed: 1.5 Mb/s lanes: 1 power: 70mA chip- >>> > ID: >>> > 413c:2106 class-ID: 0301 >>> > Device-2: 1-1.3.2:7 info: Silicon Motion - Taiwan (formerly Feiya ) >>> > Flash >>> > Drive >>> > type: mass storage driver: usb-storage interfaces: 1 rev: 2.0 >>> > speed: >>> > 480 Mb/s lanes: 1 >>> > power: 100mA chip-ID: 090c:1000 class-ID: 0806 serial: <filter> >>> > Device-3: 1-1.3.3:8 info: Primax HP Optical Mouse type: mouse >>> > driver: >>> > hid-generic,usbhid >>> > interfaces: 1 rev: 2.0 speed: 1.5 Mb/s lanes: 1 power: 98mA chip- >>> > ID: >>> > 0461:4d0f class-ID: 0301 >>> > Device-4: 1-1.3.4:9 info: HP HP LaserJet CP1025nw type: printer >>> > driver: >>> > usblp interfaces: 2 >>> > rev: 2.0 speed: 480 Mb/s lanes: 1 power: 98mA chip-ID: 03f0:0b2a >>> > class-ID: 0701 serial: <filter> >>> > Hub-5: 2-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: >>> > 12 >>> > Mb/s lanes: 1 >>> > chip-ID: 1d6b:0001 class-ID: 0900 >>> > Hub-6: 3-0:1 info: full speed or root hub ports: 2 rev: 2.0 speed: >>> > 480 >>> > Mb/s lanes: 1 >>> > chip-ID: 1d6b:0002 class-ID: 0900 >>> > Hub-7: 3-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: >>> > 2.0 >>> > speed: 480 Mb/s >>> > lanes: 1 chip-ID: 8087:0020 class-ID: 0900 >>> > Device-1: 3-1.2:3 info: Fitipower Integrated Mass Storage Device >>> > type: >>> > mass storage >>> > driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s lanes: >>> > 1 >>> > power: 250mA >>> > chip-ID: 18e3:9106 class-ID: 0806 serial: <filter> >>> > Device-2: 3-1.4:4 info: Canon CanoScan LiDE 210 type: <vendor >>> > specific> >>> > driver: N/A >>> > interfaces: 1 rev: 2.0 speed: 480 Mb/s lanes: 1 power: 500mA >>> > chip-ID: >>> > 04a9:190a class-ID: ff00 >>> > Hub-8: 4-0:1 info: full speed or root hub ports: 4 rev: 2.0 speed: >>> > 480 >>> > Mb/s lanes: 1 >>> > chip-ID: 1d6b:0002 class-ID: 0900 >>> > Hub-9: 5-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: >>> > 12 >>> > Mb/s lanes: 1 >>> > chip-ID: 1d6b:0001 class-ID: 0900 >>> > Sensors: >>> > System Temperatures: cpu: 45.0 C mobo: N/A gpu: nouveau temp: 40.0 >>> > C >>> > Fan Speeds (rpm): cpu: 921 fan-2: 800 >>> > Repos: >>> > Packages: 2609 pm: dpkg pkgs: 2597 pm: flatpak pkgs: 12 >>> > No active apt repos in: /etc/apt/sources.list >>> > Active apt repos in: /etc/apt/sources.list.d/element-io.list >>> > 1: deb [signed-by=/usr/share/keyrings/element-io-archive- >>> > keyring.gpg] >>> > https: //packages.element.io/debian/ default main >>> > Active apt repos in: >>> > /etc/apt/sources.list.d/official-package-repositories.list >>> > 1: deb http: //packages.linuxmint.com zara main upstream import >>> > backport >>> > 2: deb http: //archive.ubuntu.com/ubuntu noble main restricted >>> > universe >>> > multiverse >>> > 3: deb http: //archive.ubuntu.com/ubuntu noble-updates main >>> > restricted >>> > universe multiverse >>> > 4: deb http: //archive.ubuntu.com/ubuntu noble-backports main >>> > restricted universe multiverse >>> > 5: deb http: //security.ubuntu.com/ubuntu/ noble-security main >>> > restricted universe multiverse >>> > Active apt repos in: /etc/apt/sources.list.d/google-chrome.sources >>> > 1: deb [arch=amd64] https: //dl.google.com/linux/chrome- >>> > stable/deb/ >>> > stable main >>> > Active apt repos in: /etc/apt/sources.list.d/vivaldi.sources >>> > 1: deb [arch=amd64] https: //repo.vivaldi.com/stable/deb/ stable >>> > main >>> > Info: >>> > Memory: total: 12 GiB note: est. available: 9.57 GiB used: 5.89 GiB >>> > (61.5%) >>> > Processes: 303 Power: uptime: 8m states: freeze,mem,disk suspend: >>> > deep >>> > wakeups: 0 >>> > hibernate: platform Init: systemd v: 255 target: graphical (5) >>> > default: >>> > graphical >>> > Compilers: gcc: 13.3.0 Client: Cinnamon v: 6.4.14 inxi: 3.3.34 >>> > _______________________________________________ >>> > gnucash-user mailing list >>> > [email protected] >>> > To update your subscription preferences or to unsubscribe: >>> > https://lists.gnucash.org/mailman/listinfo/gnucash-user >>> > ----- >>> > Please remember to CC this list on all your replies. >>> > You can do this by using Reply-To-List or Reply-All. >>> >>> >>> >>> -- >>> >>> David Cousens >>> >>
2026-10-10_crash report.odt
Description: application/vnd.oasis.opendocument.text
_______________________________________________ gnucash-user mailing list [email protected] To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user ----- Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
