IIRC it's not work even without sign extend pattern since I did similar
experimental before (not for RISC-V, but same concept), I guess I need more
time to test that.
Philipp Tomsich <philipp.toms...@vrull.eu> 於 2021年11月12日 週五 00:18 寫道：
> Kito,
>
> Unless I am missing something, the problem is not the relaxation to
> GPR, but rather the sign-extending pattern I had squashed into the
> same patch.
> If you disable "<bitmanip_optab>si3_sext", a sext.w will be have to be
> emitted after the 'max' and before the return (or before the SImode
> output is consumed as a DImode), pushing the REE opportunity to a
> subsequent consumer (e.g. an addw).
>
> This will generate
> foo6:
> max a0,a0,a1
> sext.w a0,a0
> ret
> which (assuming that the inputs to max are properly sign-extended
> SImode values living in DImode registers) will be the same as
> performing the two sext.w before the max.
>
> Having a second set of eyes on this is appreciated — let me know if
> you agree and I'll revise, once I have collected feedback on the
> remaining patches of the series.
>
> Philipp.
>
>
> On Thu, 11 Nov 2021 at 17:00, Kito Cheng <kito.ch...@gmail.com> wrote:
> >
> > Hi Philipp:
> >
> > We can't pretend we have SImode min/max instruction without that
> semantic.
> > Give this testcase, x86 and rv64gc print out 8589934592 8589934591 = 0,
> > but with this patch and compile with rv64gc_zba_zbb -O3, the output
> > become 8589934592 8589934591 = 8589934592
> >
> > -------------Testcase---------------
> > #include <stdio.h>
> > long long __attribute__((noinline, noipa))
> > foo6(long long a, long long b)
> > {
> > int xa = a;
> > int xb = b;
> > return (xa > xb ? xa : xb);
> > }
> > int main() {
> > long long a = 0x200000000ll;
> > long long b = 0x1ffffffffl;
> > long long c = foo6(a, b);
> > printf ("%lld %lld = %lld\n", a, b, c);
> > return 0;
> > }
> > --------------------------------------
> > v64gc_zba_zbb -O3 w/o this patch:
> > foo6:
> > sext.w a1,a1
> > sext.w a0,a0
> > max a0,a0,a1
> > ret
> >
> > --------------------------------------
> > v64gc_zba_zbb -O3 w/ this patch:
> > foo6:
> > max a0,a0,a1
> > ret
> >
> > On Thu, Nov 11, 2021 at 10:10 PM Philipp Tomsich
> > <philipp.toms...@vrull.eu> wrote:
> > >
> > > While min/minu/max/maxu instructions are provided for XLEN only, these
> > > can safely operate on GPRs (i.e. SImode or DImode for RV64): SImode is
> > > always sign-extended, which ensures that the XLEN-wide instructions
> > > can be used for signed and unsigned comparisons on SImode yielding a
> > > correct ordering of value.
> > >
> > > This commit
> > > - relaxes the minmax pattern to express for GPR (instead of X only),
> > > providing both a si3 and di3 expansion on RV64
> > > - adds a sign-extending form for thee si3 pattern for RV64 to all REE
> > > to eliminate redundant extensions
> > > - adds test-cases for both
> > >
> > > gcc/ChangeLog:
> > >
> > > * config/riscv/bitmanip.md: Relax minmax to GPR (i.e SImode or
> > > DImode) on RV64.
> > > * config/riscv/bitmanip.md (<bitmanip_optab>si3_sext): Add
> > > pattern for REE.
> > >
> > > gcc/testsuite/ChangeLog:
> > >
> > > * gcc.target/riscv/zbb-min-max.c: Add testcases for SImode
> > > operands checking that no redundant sign- or zero-extensions
> > > are emitted.
> > >
> > > Signed-off-by: Philipp Tomsich <philipp.toms...@vrull.eu>
> > > ---
> > >
> > > gcc/config/riscv/bitmanip.md | 14 +++++++++++---
> > > gcc/testsuite/gcc.target/riscv/zbb-min-max.c | 20 +++++++++++++++++---
> > > 2 files changed, 28 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/gcc/config/riscv/bitmanip.md
> b/gcc/config/riscv/bitmanip.md
> > > index 000deb48b16..2a28f78f5f6 100644
> > > --- a/gcc/config/riscv/bitmanip.md
> > > +++ b/gcc/config/riscv/bitmanip.md
> > > @@ -260,13 +260,21 @@ (define_insn "bswap<mode>2"
> > > [(set_attr "type" "bitmanip")])
> > >
> > > (define_insn "<bitmanip_optab><mode>3"
> > > - [(set (match_operand:X 0 "register_operand" "=r")
> > > - (bitmanip_minmax:X (match_operand:X 1 "register_operand" "r")
> > > - (match_operand:X 2 "register_operand"
> "r")))]
> > > + [(set (match_operand:GPR 0 "register_operand" "=r")
> > > + (bitmanip_minmax:GPR (match_operand:GPR 1 "register_operand"
> "r")
> > > + (match_operand:GPR 2 "register_operand"
> "r")))]
> > > "TARGET_ZBB"
> > > "<bitmanip_insn>\t%0,%1,%2"
> > > [(set_attr "type" "bitmanip")])
> > >
> > > +(define_insn "<bitmanip_optab>si3_sext"
> > > + [(set (match_operand:DI 0 "register_operand" "=r")
> > > + (sign_extend:DI (bitmanip_minmax:SI (match_operand:SI 1
> "register_operand" "r")
> > > + (match_operand:SI 2 "register_operand"
> "r"))))]
> > > + "TARGET_64BIT && TARGET_ZBB"
> > > + "<bitmanip_insn>\t%0,%1,%2"
> > > + [(set_attr "type" "bitmanip")])
> > > +
> > > ;; orc.b (or-combine) is added as an unspec for the benefit of the
> support
> > > ;; for optimized string functions (such as strcmp).
> > > (define_insn "orcb<mode>2"
> > > diff --git a/gcc/testsuite/gcc.target/riscv/zbb-min-max.c
> b/gcc/testsuite/gcc.target/riscv/zbb-min-max.c
> > > index f44c398ea08..7169e873551 100644
> > > --- a/gcc/testsuite/gcc.target/riscv/zbb-min-max.c
> > > +++ b/gcc/testsuite/gcc.target/riscv/zbb-min-max.c
> > > @@ -1,5 +1,5 @@
> > > /* { dg-do compile } */
> > > -/* { dg-options "-march=rv64gc_zbb -mabi=lp64 -O2" } */
> > > +/* { dg-options "-march=rv64gc_zba_zbb -mabi=lp64 -O2" } */
> > >
> > > long
> > > foo1 (long i, long j)
> > > @@ -25,7 +25,21 @@ foo4 (unsigned long i, unsigned long j)
> > > return i > j ? i : j;
> > > }
> > >
> > > +unsigned int
> > > +foo5(unsigned int a, unsigned int b)
> > > +{
> > > + return a > b ? a : b;
> > > +}
> > > +
> > > +int
> > > +foo6(int a, int b)
> > > +{
> > > + return a > b ? a : b;
> > > +}
> > > +
> > > /* { dg-final { scan-assembler-times "min" 3 } } */
> > > -/* { dg-final { scan-assembler-times "max" 3 } } */
> > > +/* { dg-final { scan-assembler-times "max" 4 } } */
> > > /* { dg-final { scan-assembler-times "minu" 1 } } */
> > > -/* { dg-final { scan-assembler-times "maxu" 1 } } */
> > > +/* { dg-final { scan-assembler-times "maxu" 3 } } */
> > > +/* { dg-final { scan-assembler-not "zext.w" } } */
> > > +/* { dg-final { scan-assembler-not "sext.w" } } */
> > > --
> > > 2.32.0
> > >
>
