[PATCH 08/11] arm64: dts: qcom: sa8775p-ride: enable Display serial interface

[Ayushi Makhija]

Enable both DSI to DP bridge ports on SA8775P Ride plaftrom.

Signed-off-by: Ayushi Makhija <quic_amakh...@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 66 +++++++++++++++++++++-
 1 file changed, 64 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi 
b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
index 151f66512303..02d8a9c2c909 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
@@ -128,6 +128,30 @@ dp1_connector_in: endpoint {
                        };
                };
        };
+
+       dsi0-connector {
+               compatible = "dp-connector";
+               label = "DSI0";
+               type = "full-size";
+
+               port {
+                       dsi0_connector_in: endpoint {
+                               remote-endpoint = <&anx7625_1_out>;
+                       };
+               };
+       };
+
+       dsi1-connector {
+               compatible = "dp-connector";
+               label = "DSI1";
+               type = "full-size";
+
+               port {
+                       dsi1_connector_in: endpoint {
+                               remote-endpoint = <&anx7625_2_out>;
+                       };
+               };
+       };
 };
 
 &apps_rsc {
@@ -598,7 +622,9 @@ anx7625_1_in: endpoint {
                                        dsi2dp_bridge_1_out: port@1 {
                                                reg = <1>;
 
-                                               anx7625_1_out: endpoint { };
+                                               anx7625_1_out: endpoint {
+                                                       remote-endpoint = 
<&dsi0_connector_in>;
+                                               };
                                        };
                                };
                        };
@@ -632,7 +658,9 @@ anx7625_2_in: endpoint {
                                        dsi2dp_bridge_2_out: port@1 {
                                                reg = <1>;
 
-                                               anx7625_2_out: endpoint { };
+                                               anx7625_2_out: endpoint {
+                                                       remote-endpoint = 
<&dsi1_connector_in>;
+                                               };
                                        };
                                };
                        };
@@ -685,6 +713,40 @@ &mdss0_dp1_phy {
        status = "okay";
 };
 
+&mdss0_dsi0 {
+       vdda-supply = <&vreg_l1c>;
+
+       status = "okay";
+};
+
+&mdss0_dsi0_out {
+       data-lanes = <0 1 2 3>;
+       remote-endpoint = <&anx7625_1_in>;
+};
+
+&mdss0_dsi0_phy {
+       vdds-supply = <&vreg_l4a>;
+
+       status = "okay";
+};
+
+&mdss0_dsi1 {
+       vdda-supply = <&vreg_l1c>;
+
+       status = "okay";
+};
+
+&mdss0_dsi1_out {
+       data-lanes = <0 1 2 3>;
+       remote-endpoint = <&anx7625_2_in>;
+};
+
+&mdss0_dsi1_phy {
+       vdds-supply = <&vreg_l4a>;
+
+       status = "okay";
+};
+
 &pmm8654au_0_gpios {
        gpio-line-names = "DS_EN",
                          "POFF_COMPLETE",
-- 
2.34.1