On Tue, Feb 25, 2025 at 05:48:21PM +0530, Ayushi Makhija wrote:
> Enable both DSI to DP bridge ports on SA8775P Ride plaftrom.
>
> Signed-off-by: Ayushi Makhija <quic_amakh...@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 66 +++++++++++++++++++++-
> 1 file changed, 64 insertions(+), 2 deletions(-)
Please squash into the previous patch. It doesn't make a lot of sense
separately.
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> index 151f66512303..02d8a9c2c909 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> @@ -128,6 +128,30 @@ dp1_connector_in: endpoint {
> };
> };
> };
> +
> + dsi0-connector {
dpN-connector. It is not DSI.
> + compatible = "dp-connector";
> + label = "DSI0";
Is it an actual label on it?
> + type = "full-size";
> +
> + port {
> + dsi0_connector_in: endpoint {
> + remote-endpoint = <&anx7625_1_out>;
> + };
> + };
> + };
> +
--
With best wishes
Dmitry
