On 25.02.2025 1:18 PM, Ayushi Makhija wrote:
> Add anx7625 DSI to DP bridge device nodes.
>
> Signed-off-by: Ayushi Makhija <quic_amakh...@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 136 ++++++++++++++++++++-
> 1 file changed, 135 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> index 175f8b1e3b2d..151f66512303 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
> @@ -517,9 +517,128 @@ &i2c11 {
>
> &i2c18 {
> clock-frequency = <400000>;
> - pinctrl-0 = <&qup_i2c18_default>;
> + pinctrl-0 = <&qup_i2c18_default>,
> + <&io_expander_intr_active>,
> + <&io_expander_reset_active>;
Please align the '<'s
> pinctrl-names = "default";
> +
> status = "okay";
> +
> + io_expander: gpio@74 {
> + compatible = "ti,tca9539";
> + reg = <0x74>;
> + interrupt-parent = <&tlmm>;
> + interrupts = <98 IRQ_TYPE_EDGE_BOTH>;
use interrupts-extended, here and below
Konrad
