Hi Adrian,

awesome, it's working fine now.. Thanks a bunch for this hint, i have been 
rebuilding world and kernel a lot last few days and haven't been able to figure 
it out, eventually ripping all options out and building a stock image, which 
"seemingly" dind't work either, so thanks again.

Also, thank you very, very much for your ongoing work on all the FreeBSD 
Wireless Drivers you are working on.

Cheers..

Sydney
> On Jun 29, 2016, at 20:51, Adrian Chadd <adrian.ch...@gmail.com> wrote:
> 
> Hi,
> 
> It's there, it just doesn't show up in ifconfig anymore.
> 
> sysctl net.wlan.devices
> 
> if you create the interface (ifconfig wlan0 create wlandev ath0) then
> it'll show up!
> 
> 
> -adiran
> 
> 
> On 29 June 2016 at 11:45, Sydney Meyer via freebsd-wireless
> <freebsd-wireless@freebsd.org> wrote:
>> Hello,
>> 
>> i seem to be unable to get the ath driver working on a PC Engines APU 2C2 
>> Board with a Compex WLE200NX (AR9280) MiniPCIe-Card booting from a NanoBSD 
>> Image built from HEAD.
>> 
>> I have built the NanoBSD Image without any BUILD, INSTALL or WORLD options 
>> and with a GENERIC-NODEBUG Kernel.
>> 
>> I can see the Card in dmesg with
>> 
>> root@:~ # dmesg | grep ath
>> ath0: <Atheros 9280> mem 0xfe800000-0xfe80ffff at device 0.0 on pci4
>> [ath] enabling AN_TOP2_FIXUP
>> ath0: [HT] enabling HT modes
>> ath0: [HT] 1 stream STBC receive enabled
>> ath0: [HT] 1 stream STBC transmit enabled
>> ath0: [HT] 2 RX streams; 2 TX streams
>> ath0: AR9280 mac 128.2 RF5133 phy 13.0
>> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
>> 
>> and pciconf -lv shows
>> 
>> ath0@pci0:4:0:0:        class=0x028000 card=0x3099168c chip=0x002a168c 
>> rev=0x01 hdr=0x00
>>    vendor     = 'Qualcomm Atheros'
>>    device     = 'AR928X Wireless Network Adapter (PCI-Express)'
>>    class      = network
>> 
>> and
>> 
>> root@:~ # kldstat -v | grep ath
>>                89 pci/ath_pci
>> 
>> but the Card doesn't show up with ifconfig.
>> 
>> When booting from USB with 
>> FreeBSD-11.0-ALPHA5-amd64-20160624-r302164-memstick.img the Card is getting 
>> recognised regularly with ifconfig as ath0.
>> _______________________________________________
>> freebsd-wireless@freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>> To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

_______________________________________________
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Reply via email to