Hi, It's there, it just doesn't show up in ifconfig anymore.
sysctl net.wlan.devices if you create the interface (ifconfig wlan0 create wlandev ath0) then it'll show up! -adiran On 29 June 2016 at 11:45, Sydney Meyer via freebsd-wireless <freebsd-wireless@freebsd.org> wrote: > Hello, > > i seem to be unable to get the ath driver working on a PC Engines APU 2C2 > Board with a Compex WLE200NX (AR9280) MiniPCIe-Card booting from a NanoBSD > Image built from HEAD. > > I have built the NanoBSD Image without any BUILD, INSTALL or WORLD options > and with a GENERIC-NODEBUG Kernel. > > I can see the Card in dmesg with > > root@:~ # dmesg | grep ath > ath0: <Atheros 9280> mem 0xfe800000-0xfe80ffff at device 0.0 on pci4 > [ath] enabling AN_TOP2_FIXUP > ath0: [HT] enabling HT modes > ath0: [HT] 1 stream STBC receive enabled > ath0: [HT] 1 stream STBC transmit enabled > ath0: [HT] 2 RX streams; 2 TX streams > ath0: AR9280 mac 128.2 RF5133 phy 13.0 > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 > > and pciconf -lv shows > > ath0@pci0:4:0:0: class=0x028000 card=0x3099168c chip=0x002a168c > rev=0x01 hdr=0x00 > vendor = 'Qualcomm Atheros' > device = 'AR928X Wireless Network Adapter (PCI-Express)' > class = network > > and > > root@:~ # kldstat -v | grep ath > 89 pci/ath_pci > > but the Card doesn't show up with ifconfig. > > When booting from USB with > FreeBSD-11.0-ALPHA5-amd64-20160624-r302164-memstick.img the Card is getting > recognised regularly with ifconfig as ath0. > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org" _______________________________________________ freebsd-wireless@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
