Hello,
i seem to be unable to get the ath driver working on a PC Engines APU 2C2 Board
with a Compex WLE200NX (AR9280) MiniPCIe-Card booting from a NanoBSD Image
built from HEAD.
I have built the NanoBSD Image without any BUILD, INSTALL or WORLD options and
with a GENERIC-NODEBUG Kernel.
I can see the Card in dmesg with
root@:~ # dmesg | grep ath
ath0: <Atheros 9280> mem 0xfe800000-0xfe80ffff at device 0.0 on pci4
[ath] enabling AN_TOP2_FIXUP
ath0: [HT] enabling HT modes
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR9280 mac 128.2 RF5133 phy 13.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
and pciconf -lv shows
ath0@pci0:4:0:0: class=0x028000 card=0x3099168c chip=0x002a168c rev=0x01
hdr=0x00
vendor = 'Qualcomm Atheros'
device = 'AR928X Wireless Network Adapter (PCI-Express)'
class = network
and
root@:~ # kldstat -v | grep ath
89 pci/ath_pci
but the Card doesn't show up with ifconfig.
When booting from USB with
FreeBSD-11.0-ALPHA5-amd64-20160624-r302164-memstick.img the Card is getting
recognised regularly with ifconfig as ath0.
_______________________________________________
freebsd-wireless@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
