On Fri, Feb 01, 2008 at 03:56:17PM +0200, Andriy Gapon wrote:
> on 01/02/2008 15:42 Andriy Gapon said the following:
> > on 01/02/2008 14:36 Pyun YongHyeon said the following:
> >> After applying attached patch and let me know the output of
> >> "devid : xxx, revid : xxx, pwr = xxx". It would be even better
> >> if you can show me the above message for working/non-working case.
> >>
> >>
> >
> > Applied the patch with correction to actually print rev instead of dev
> > for the second time :-)
> > This is in working case:
> > devid : 269, revid : a3, pwr = 00000003
>
> A clarification: I just applied the patch, recompiled and re-loaded the
> module. There was no reboot/poweroff/reset in between.
>
> > Will wait for the non-working situation.
> >
>
Revert previous patch and try attached patch again and let me know
how it goes.
--
Regards,
Pyun YongHyeon
--- sys/dev/nfe/if_nfe.c.orig 2008-02-02 04:36:24.000000000 +0900
+++ sys/dev/nfe/if_nfe.c 2008-02-04 12:47:11.000000000 +0900
@@ -763,12 +763,6 @@
if ((sc->nfe_flags & NFE_PWR_MGMT) == 0)
return;
- NFE_WRITE(sc, NFE_RXTX_CTL, NFE_RXTX_RESET | NFE_RXTX_BIT2);
- NFE_WRITE(sc, NFE_MAC_RESET, NFE_MAC_RESET_MAGIC);
- DELAY(100);
- NFE_WRITE(sc, NFE_MAC_RESET, 0);
- DELAY(100);
- NFE_WRITE(sc, NFE_RXTX_CTL, NFE_RXTX_BIT2);
pwr = NFE_READ(sc, NFE_PWR2_CTL);
pwr &= ~NFE_PWR2_WAKEUP_MASK;
if (sc->nfe_revid >= 0xa3 &&
@@ -776,6 +770,12 @@
sc->nfe_devid == PCI_PRODUCT_NVIDIA_NFORCE430_LAN2))
pwr |= NFE_PWR2_REVA3;
NFE_WRITE(sc, NFE_PWR2_CTL, pwr);
+ NFE_WRITE(sc, NFE_RXTX_CTL, NFE_RXTX_RESET | NFE_RXTX_BIT2);
+ NFE_WRITE(sc, NFE_MAC_RESET, NFE_MAC_RESET_MAGIC);
+ DELAY(100);
+ NFE_WRITE(sc, NFE_MAC_RESET, 0);
+ DELAY(100);
+ NFE_WRITE(sc, NFE_RXTX_CTL, NFE_RXTX_BIT2);
}
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
