on 26/02/2008 09:36 Pyun YongHyeon said the following: > > Nice catch! > The register name in nfe(4) for NvRegMIIMask is NFE_SETUP_R4. > According to Linux driver it's used for generating link state > change interrupt. So I guess nfe(4) may have to clear the > register in nfe_stop(). How about clearing the register as > attached patch? (Sorry I couldn't test this ATM...)
Unfortunately, the latest patch didn't make any difference either. So the issue is where it was: do a reboot or a power off / power on cycle - nfe is good, press reset and boot - nfe is silently dead. There is even a stranger thing: in the problematic scenario, if I unload nfe.ko and load nve.ko then the NIC becomes alive, unload nve and re-load nfe NIC is still dead. Mystery. I'll try to do more local debugging later when I have a chance to hit the reset button. -- Andriy Gapon _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
