On Apr 17, 2019, at 9:44 AM, Filippo Moretti via freebsd-stable
<freebsd-stable@freebsd.org> wrote:
I previously reported that I was unable to boot my system with STABLE-12
of april 13 the system stop at Loading kernel modules.I installed
stable-12 snapshot of april 11 on a second disc to try to rescue the
first one.I could go on with my plan until I installed drm kmodand addedd
kld_list=/boot/modules/radeonkms.ko in /etc/rc.conf
I have a radeon graphics card, too. Recently, I had a problem with the
graphics/drm-kmod hanging on boot in multi-user. My fix was to switch to
graphics/drm-legacy-kmod, which at least lets the system boot again. I
figure the newer graphics/drm-kmod no longer supports my old radeon card.
now also this second disk no longer boots,it stops in Loading kernel
modules.Further how can I mount ada0p3 partition rw on this second disc
considering that bot are zfs?(I could not figure this out mysel)I plan to
reinstall on the second disksincerelyFilippo
The easiest way to be able to edit the configuration of the existing system
to fix things is to boot it in single user mode (press "2" from the loader
menu).
When you get to the single user prompt, you can then mount your ZFS file
systems for writing as follows:
mount -uw /
/etc/rc.d/zfsbe start
/etc/rc.d/zfs start
You can then, e.g., edit /etc/rc.conf and remove the problematic kld_list
entry.
Cheers,
Paul.
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
