On Wed, 18 May 2011 12:05:20 +0200, Maciej Milewski <m...@dat.pl>
wrote:
Dnia środa, 18 maja 2011 o 11:40:36 crsnet.pl napisał(a):
Hello.
Have here anyone run this modem/GPS under FreeBSD 8.2 ? Modem is
recognized, but when i try to run ppp -ddial iplus i get this error
:
/var/log/messages
May 18 11:20:59 x60s ppp[1656]: tun0: Warning: Chat script failed
/var/log/ppp
May 18 11:20:53 x60s ppp[1656]: tun0: Phase: deflink: opening ->
dial
May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Send: AT^M
May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Expect(2): OK
May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: AT^M^M
May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: OK^M
May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Send: AT+CFUN=1^M
May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Expect(2): OK
May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: AT+CFUN=1^M^M
May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: ERROR^M
For GPS i try to use
gpsdrive-2.09_11 A GPS navigation system
viking-1.0.2 Program to manage GPS data (tracks, waypoints,
etc)
But any of them can use X300 GPS;/
#uname -a
FreeBSD x60s 8.2-RELEASE FreeBSD 8.2-RELEASE #0: Fri Feb 18
02:24:46
UTC 2011
r...@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
i386
#dmesg
ugen6.3: <vendor 0x17ef> at usbus6
ugen4.2: <Sierra Wireless, Incorporated> at usbus4
u3g0: <Data Interface> on usbus4
u3g0: Found 3 ports.
#sudo usbconfig
ugen4.2: <Sierra Wireless MC5725 Modem Sierra Wireless,
Incorporated>
at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen6.4: <Wimedia device ManfID> at usbus6, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
#ls -la /dev/cuaU*
crw-rw---- 1 uucp dialer 0, 123 18 maj 09:39 /dev/cuaU0.0
crw-rw---- 1 uucp dialer 0, 124 18 maj 09:39 /dev/cuaU0.0.init
crw-rw---- 1 uucp dialer 0, 125 18 maj 09:39 /dev/cuaU0.0.lock
crw-rw---- 1 uucp dialer 0, 129 18 maj 09:39 /dev/cuaU0.1
crw-rw---- 1 uucp dialer 0, 130 18 maj 09:39 /dev/cuaU0.1.init
crw-rw---- 1 uucp dialer 0, 131 18 maj 09:39 /dev/cuaU0.1.lock
crw-rw---- 1 uucp dialer 0, 135 18 maj 09:39 /dev/cuaU0.2
crw-rw---- 1 uucp dialer 0, 136 18 maj 09:39 /dev/cuaU0.2.init
crw-rw---- 1 uucp dialer 0, 137 18 maj 09:39 /dev/cuaU0.2.lock
#cat /etc/ppp/ppp.conf
iplus:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)
set device /dev/cuaU0.0
set speed 460800
#set speed 115200
set dial "ABORT BUSY TIMEOUT 2 \
\"\" \
AT OK-AT-OK \
AT+CFUN=1 OK-AT-OK \
AT+CMEE=2 OK-AT-OK \
AT+CSQ OK \
AT+CGDCONT=1,\\\"IP\\\",\\\"internet\\\" OK \
AT+CGACT? OK-AT-OK \
AT+CGATT? OK \
AT+CGCLASS? OK \
AT+COPS? OK \
ATD*99***1# CONNECT"
set timeout 180
enable dns
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR
Regards, Adrian.
Do you have a pin defined on sim?
No.
I check with minicom that AT+CFUN=1 (Turns modem on) give Error but
AT+PCSTATE=1 turns it on.
Unfortunately when i change it in ppp.conf from AT+CFUN=1 to
AT+PCSTATE=1 that give me
May 18 12:13:48 x60s ppp[2697]: tun0: Chat: Send: AT+PCSTATE=1^M
May 18 12:13:48 x60s ppp[2697]: tun0: Chat: Expect(2): OK
May 18 12:13:48 x60s ppp[2697]: tun0: Chat: Received: AT+PCSTATE=1^M^M
May 18 12:13:48 x60s ppp[2697]: tun0: Chat: Received: ERROR^M
May 18 12:13:50 x60s ppp[2697]: tun0: Chat: Expect timeout
--
Maciej
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
