Dnia środa, 18 maja 2011 o 11:40:36 crsnet.pl napisał(a): > Hello. > Have here anyone run this modem/GPS under FreeBSD 8.2 ? Modem is > recognized, but when i try to run ppp -ddial iplus i get this error : > > /var/log/messages > May 18 11:20:59 x60s ppp[1656]: tun0: Warning: Chat script failed > > /var/log/ppp > May 18 11:20:53 x60s ppp[1656]: tun0: Phase: deflink: opening -> dial > May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Send: AT^M > May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Expect(2): OK > May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: AT^M^M > May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: OK^M > May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Send: AT+CFUN=1^M > May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Expect(2): OK > May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: AT+CFUN=1^M^M > May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: ERROR^M > > > For GPS i try to use > gpsdrive-2.09_11 A GPS navigation system > viking-1.0.2 Program to manage GPS data (tracks, waypoints, etc) > But any of them can use X300 GPS;/ > > #uname -a > FreeBSD x60s 8.2-RELEASE FreeBSD 8.2-RELEASE #0: Fri Feb 18 02:24:46 > UTC 2011 r...@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > i386 > > #dmesg > ugen6.3: <vendor 0x17ef> at usbus6 > ugen4.2: <Sierra Wireless, Incorporated> at usbus4 > u3g0: <Data Interface> on usbus4 > u3g0: Found 3 ports. > > #sudo usbconfig > ugen4.2: <Sierra Wireless MC5725 Modem Sierra Wireless, Incorporated> > at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON > ugen6.4: <Wimedia device ManfID> at usbus6, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=ON > > #ls -la /dev/cuaU* > crw-rw---- 1 uucp dialer 0, 123 18 maj 09:39 /dev/cuaU0.0 > crw-rw---- 1 uucp dialer 0, 124 18 maj 09:39 /dev/cuaU0.0.init > crw-rw---- 1 uucp dialer 0, 125 18 maj 09:39 /dev/cuaU0.0.lock > crw-rw---- 1 uucp dialer 0, 129 18 maj 09:39 /dev/cuaU0.1 > crw-rw---- 1 uucp dialer 0, 130 18 maj 09:39 /dev/cuaU0.1.init > crw-rw---- 1 uucp dialer 0, 131 18 maj 09:39 /dev/cuaU0.1.lock > crw-rw---- 1 uucp dialer 0, 135 18 maj 09:39 /dev/cuaU0.2 > crw-rw---- 1 uucp dialer 0, 136 18 maj 09:39 /dev/cuaU0.2.init > crw-rw---- 1 uucp dialer 0, 137 18 maj 09:39 /dev/cuaU0.2.lock > > #cat /etc/ppp/ppp.conf > iplus: > set log Phase Chat LCP IPCP CCP tun command > ident user-ppp VERSION (built COMPILATIONDATE) > > set device /dev/cuaU0.0 > set speed 460800 > #set speed 115200 > set dial "ABORT BUSY TIMEOUT 2 \ > \"\" \ > AT OK-AT-OK \ > AT+CFUN=1 OK-AT-OK \ > AT+CMEE=2 OK-AT-OK \ > AT+CSQ OK \ > AT+CGDCONT=1,\\\"IP\\\",\\\"internet\\\" OK \ > AT+CGACT? OK-AT-OK \ > AT+CGATT? OK \ > AT+CGCLASS? OK \ > AT+COPS? OK \ > ATD*99***1# CONNECT" > > set timeout 180 > enable dns > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > add default HISADDR > > Regards, Adrian. Do you have a pin defined on sim?
-- Maciej _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
