2010/9/26 Andriy Gapon <a...@icyb.net.ua>: > on 26/09/2010 20:37 David DEMELIER said the following: >> mark...@melon ~ $ sudo camcontrol devlist >> <WDC WD3200BEKT-60F3T1 12.01A12> at scbus0 target 0 lun 0 (ada0) >> <hp DVDRAM GT20L DC05> at scbus1 target 0 lun 0 (cd0) >> >> mark...@melon ~ $ sudo cdrecord >> downloads/FreeBSD-8.1-RELEASE-amd64-livefs.iso >> cdrecord: No write mode specified. >> cdrecord: Assuming -sao mode. >> cdrecord: If your drive does not accept -sao, try -tao. >> cdrecord: Future versions of cdrecord may have different drive >> dependent defaults. >> Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright >> (C) 1995-2010 Jörg Schilling >> cdrecord: Error 0. Cannot open or use SCSI driver. >> cdrecord: For possible targets try 'cdrecord -scanbus'. >> cdrecord: For possible transport specifiers try 'cdrecord dev=help'. >> >> mark...@melon ~ $ sudo cdrecord -scanbus >> Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright >> (C) 1995-2010 Jörg Schilling >> cdrecord: Error 0. Cannot open or use SCSI driver. >> cdrecord: For possible targets try 'cdrecord -scanbus'. >> cdrecord: For possible transport specifiers try 'cdrecord dev=help'. > > Doesn't look like you have xpt and pass devices in your kernel, which are > (almost) mandatory when use CAM-based drivers. > Not sure if ahci(4) mentions this. > > -- > Andriy Gapon >
Everything works now… Sorry for the noise ! We can close the PR too. -- Demelier David _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
