on 26/09/2010 20:37 David DEMELIER said the following: > mark...@melon ~ $ sudo camcontrol devlist > <WDC WD3200BEKT-60F3T1 12.01A12> at scbus0 target 0 lun 0 (ada0) > <hp DVDRAM GT20L DC05> at scbus1 target 0 lun 0 (cd0) > > mark...@melon ~ $ sudo cdrecord downloads/FreeBSD-8.1-RELEASE-amd64-livefs.iso > cdrecord: No write mode specified. > cdrecord: Assuming -sao mode. > cdrecord: If your drive does not accept -sao, try -tao. > cdrecord: Future versions of cdrecord may have different drive > dependent defaults. > Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright > (C) 1995-2010 Jörg Schilling > cdrecord: Error 0. Cannot open or use SCSI driver. > cdrecord: For possible targets try 'cdrecord -scanbus'. > cdrecord: For possible transport specifiers try 'cdrecord dev=help'. > > mark...@melon ~ $ sudo cdrecord -scanbus > Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright > (C) 1995-2010 Jörg Schilling > cdrecord: Error 0. Cannot open or use SCSI driver. > cdrecord: For possible targets try 'cdrecord -scanbus'. > cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
Doesn't look like you have xpt and pass devices in your kernel, which are (almost) mandatory when use CAM-based drivers. Not sure if ahci(4) mentions this. -- Andriy Gapon _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
