The following reply was made to PR kern/92090; it has been noted by GNATS. From: Floris Bos <i...@je-eigen-domein.nl> To: bug-follo...@freebsd.org Cc: Subject: Re: kern/92090: [bge] bge: watchdog timeout -- resetting Date: Thu, 14 Jan 2010 02:14:07 +0100
This might be a different problem, but I add it to this bug as I am getting the same error message. I have a brand new HP DL120 G6 server which has an on-board NIC that is based on the BCM5723 chipset. The NIC is not supported/recognized by FreeBSD 8, but the FreeBSD 9 (January snapshot) identifies it as: == bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xdf900000-0xdf90ffff irq 16 at device 0.0 on pci32 == After boot, the network works for about 5 seconds, barely enough time to get an IP by DHCP, and sent a ping or 2. Then network connectivity goes down, and after some time there is a "bge0: watchdog timeout -- resetting" message. Then network works again for 5 seconds, and goes down again. All the time, repeatedly. The system works fine under Ubuntu. So I assume the hardware is ok. Yours sincerley, Floris Bos _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
