Jonathan Disher writes: > On Wed, 11 Dec 2002, Long Le wrote: > > > Hi all, > > > > We installed FreeBSD 4.7 on an IBM eServer machine with an on-board > > copper Broadcom BCM5703X and put two more fiber Broadcom BCM5703X NICs > > into the machine. We used cvs to get the latest update on the stable > > branch yesterday. However, only the copper NIC and one fiber NIC > > come up. The log message says "bge2: MII without any PHY!" for the > > second fiber NIC. Does anyone have any suggestion for us? > > I'm in somewhat the same boat. We just purchased and installed two ASUS > A7V8X motherboards with onboard Broadcom BCM5702 Gigabit ethernet > controllers, and we're having some problems getting them to work. I > cvsup'd to the latest -STABLE last night, and the controller is found, but > it's using ukphy instead of brgphy. Has anyone gotten this controller to
New phy support which is required for the BCM5703 was merged from current yesterday. You may which to try a more recent stable and verify that you have rev 1.4.2.10 of sys/dev/mii/miidevs.h Drew To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-net" in the body of the message
