Hi all, We installed FreeBSD 4.7 on an IBM eServer machine with an on-board copper Broadcom BCM5703X and put two more fiber Broadcom BCM5703X NICs into the machine. We used cvs to get the latest update on the stable branch yesterday. However, only the copper NIC and one fiber NIC come up. The log message says "bge2: MII without any PHY!" for the second fiber NIC. Does anyone have any suggestion for us?
The dmesg is in attachment of this mail. Please kindly copy your reply to my email address because I'm not on the list. Thanks, -- long
Dec 9 13:31:52 professor /kernel: Copyright (c) 1992-2002 The FreeBSD Project. Dec 9 13:31:52 professor /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Dec 9 13:31:52 professor /kernel: The Regents of the University of California. All rights reserved. Dec 9 13:31:52 professor /kernel: FreeBSD 4.7-STABLE #1: Mon Dec 9 12:13:43 EST 2002 Dec 9 13:31:52 professor /kernel: [EMAIL PROTECTED]:/usr/src/sys/compile/DIRT Dec 9 13:31:52 professor /kernel: Timecounter "i8254" frequency 1193182 Hz Dec 9 13:31:52 professor /kernel: CPU: Pentium 4 (1796.08-MHz 686-class CPU) Dec 9 13:31:52 professor /kernel: Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Dec 9 13:31:52 professor /kernel: Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC> Dec 9 13:31:52 professor /kernel: real memory = 1342144512 (1310688K bytes) Dec 9 13:31:52 professor /kernel: avail memory = 1299828736 (1269364K bytes) Dec 9 13:31:52 professor /kernel: Preloaded elf kernel "kernel" at 0xc051f000. Dec 9 13:31:52 professor /kernel: Pentium Pro MTRR support enabled Dec 9 13:31:52 professor /kernel: md0: Malloc disk Dec 9 13:31:52 professor /kernel: npx0: <math processor> on motherboard Dec 9 13:31:52 professor /kernel: npx0: INT 16 interface Dec 9 13:31:52 professor /kernel: pcib0: <Host to PCI bridge> on motherboard Dec 9 13:31:52 professor /kernel: pci0: <PCI bus> on pcib0 Dec 9 13:31:52 professor /kernel: pci0: <ATI Mach64-GR graphics accelerator> at 9.0 irq 10 Dec 9 13:31:52 professor /kernel: atapci0: <ServerWorks CSB5 ATA100 controller> port 0x700-0x70f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 Dec 9 13:31:52 professor /kernel: ata0: at 0x1f0 irq 14 on atapci0 Dec 9 13:31:52 professor /kernel: ata1: at 0x170 irq 15 on atapci0 Dec 9 13:31:52 professor /kernel: ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 11 at device 15.2 on pci0 Dec 9 13:31:52 professor /kernel: usb0: OHCI version 1.0, legacy support Dec 9 13:31:52 professor /kernel: usb0: <OHCI (generic) USB controller> on ohci0 Dec 9 13:31:52 professor /kernel: usb0: USB revision 1.0 Dec 9 13:31:52 professor /kernel: uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Dec 9 13:31:52 professor /kernel: uhub0: 4 ports with 4 removable, self powered Dec 9 13:31:52 professor /kernel: isab0: <PCI to ISA bridge (vendor=1166 device=0225)> at device 15.3 on pci0 Dec 9 13:31:52 professor /kernel: isa0: <ISA bus> on isab0 Dec 9 13:31:52 professor /kernel: pcib1: <Host to PCI bridge> on motherboard Dec 9 13:31:52 professor /kernel: pci1: <PCI bus> on pcib1 Dec 9 13:31:52 professor /kernel: pcib2: <Host to PCI bridge> on motherboard Dec 9 13:31:52 professor /kernel: pci2: <PCI bus> on pcib2 Dec 9 13:31:52 professor /kernel: bge0: <Broadcom BCM5703X Gigabit Ethernet> mem 0xfbff0000-0xfbffffff irq 10 at device 8.0 on pci2 Dec 9 13:31:52 professor /kernel: bge0: Ethernet address: 00:02:55:07:51:4f Dec 9 13:31:53 professor /kernel: miibus0: <MII bus> on bge0 Dec 9 13:31:53 professor /kernel: ukphy0: <Generic IEEE 802.3u media interface> on miibus0 Dec 9 13:31:53 professor /kernel: ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Dec 9 13:31:53 professor /kernel: pcib3: <Host to PCI bridge> on motherboard Dec 9 13:31:53 professor /kernel: pci3: <PCI bus> on pcib3 Dec 9 13:31:53 professor /kernel: pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard Dec 9 13:31:53 professor /kernel: pci4: <PCI bus> on pcib4 Dec 9 13:31:53 professor /kernel: pcib5: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard Dec 9 13:31:53 professor /kernel: pci5: <PCI bus> on pcib5 Dec 9 13:31:53 professor /kernel: mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2300-0x23ff mem 0xf9fe0000-0xf9feffff,0xf9ff0000-0xf9ffffff irq 9 at device 7.0 on pci5 Dec 9 13:31:53 professor /kernel: mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x2400-0x24ff mem 0xf9fc0000-0xf9fcffff,0xf9fd0000-0xf9fdffff irq 9 at device 7.1 on pci5 Dec 9 13:31:53 professor /kernel: pcib7: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard Dec 9 13:31:53 professor /kernel: pci7: <PCI bus> on pcib7 Dec 9 13:31:53 professor /kernel: bge1: <Broadcom BCM5703X Gigabit Ethernet> mem 0xf7ff0000-0xf7ffffff irq 11 at device 5.0 on pci7 Dec 9 13:31:53 professor /kernel: bge1: Ethernet address: 00:10:18:00:48:6f Dec 9 13:31:53 professor /kernel: miibus1: <MII bus> on bge1 Dec 9 13:31:53 professor /kernel: ukphy1: <Generic IEEE 802.3u media interface> on miibus1 Dec 9 13:31:53 professor /kernel: ukphy1: no media present Dec 9 13:31:53 professor /kernel: pcib9: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard Dec 9 13:31:53 professor /kernel: pci9: <PCI bus> on pcib9 Dec 9 13:31:53 professor /kernel: bge2: <Broadcom BCM5703X Gigabit Ethernet> mem 0xf53f0000-0xf53fffff irq 3 at device 6.0 on pci9 Dec 9 13:31:53 professor /kernel: bge2: Ethernet address: 00:10:18:00:48:9a Dec 9 13:31:53 professor /kernel: bge2: MII without any PHY! Dec 9 13:31:53 professor /kernel: device_probe_and_attach: bge2 attach returned 6 Dec 9 13:31:53 professor /kernel: orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xcd800-0xcefff,0xcf000-0xd07ff on isa0 Dec 9 13:31:53 professor /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Dec 9 13:31:53 professor /kernel: fdc0: FIFO enabled, 8 bytes threshold Dec 9 13:31:53 professor /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Dec 9 13:31:53 professor /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Dec 9 13:31:53 professor /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Dec 9 13:31:53 professor /kernel: kbd0 at atkbd0 Dec 9 13:31:53 professor /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 Dec 9 13:31:53 professor /kernel: psm0: model Generic PS/2 mouse, device ID 0 Dec 9 13:31:53 professor /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Dec 9 13:31:53 professor /kernel: sc0: <System console> at flags 0x100 on isa0 Dec 9 13:31:53 professor /kernel: sc0: VGA <16 virtual consoles, flags=0x300> Dec 9 13:31:53 professor /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Dec 9 13:31:53 professor /kernel: sio0: type 16550A Dec 9 13:31:53 professor /kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 Dec 9 13:31:53 professor /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 Dec 9 13:31:53 professor /kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode Dec 9 13:31:53 professor /kernel: plip0: <PLIP network interface> on ppbus0 Dec 9 13:31:53 professor /kernel: lpt0: <Printer> on ppbus0 Dec 9 13:31:53 professor /kernel: lpt0: Interrupt-driven port Dec 9 13:31:53 professor /kernel: ppi0: <Parallel I/O> on ppbus0 Dec 9 13:31:53 professor /kernel: IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled Dec 9 13:31:53 professor /kernel: DUMMYNET initialized (011031) Dec 9 13:31:53 professor /kernel: acd0: CDROM <HL-DT-ST CD-ROM GCR-8480B> at ata0-master PIO4 Dec 9 13:31:53 professor /kernel: Waiting 15 seconds for SCSI devices to settle Dec 9 13:31:53 professor /kernel: pass5 at mpt0 bus 0 target 8 lun 0 Dec 9 13:31:53 professor /kernel: pass5: <IBM 32P0042a S320 1 1> Fixed Processor SCSI-2 device Dec 9 13:31:53 professor /kernel: pass5: 3.300MB/s transfers Dec 9 13:31:53 professor /kernel: da0 at mpt0 bus 0 target 1 lun 0 Dec 9 13:31:53 professor /kernel: da0: <IBM-ESXS ST336752LC !# B841> Fixed Direct Access SCSI-3 device Dec 9 13:31:53 professor /kernel: da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled Dec 9 13:31:53 professor /kernel: da0: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C) Dec 9 13:31:53 professor /kernel: da2 at mpt0 bus 0 target 3 lun 0 Dec 9 13:31:53 professor /kernel: da2: <IBM-ESXS ST336752LC !# B841> Fixed Direct Access SCSI-3 device Dec 9 13:31:53 professor /kernel: da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled Dec 9 13:31:53 professor /kernel: da2: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C) Dec 9 13:31:53 professor /kernel: da1 at mpt0 bus 0 target 2 lun 0 Dec 9 13:31:53 professor /kernel: da1: <IBM-ESXS ST336752LC !# B841> Fixed Direct Access SCSI-3 device Dec 9 13:31:53 professor /kernel: da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled Dec 9 13:31:53 professor /kernel: da1: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C) Dec 9 13:31:53 professor /kernel: da4 at mpt0 bus 0 target 5 lun 0 Dec 9 13:31:53 professor /kernel: da4: <IBM-ESXS ST336752LC !# B841> Fixed Direct Access SCSI-3 device Dec 9 13:31:53 professor /kernel: da4: 3.300MB/s transfers, Tagged Queueing Enabled Dec 9 13:31:53 professor /kernel: da4: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C) Dec 9 13:31:53 professor /kernel: da3 at mpt0 bus 0 target 4 lun 0 Dec 9 13:31:53 professor /kernel: da3: <IBM-ESXS ST336752LC !# B841> Fixed Direct Access SCSI-3 device Dec 9 13:31:53 professor /kernel: da3: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled Dec 9 13:31:53 professor /kernel: da3: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C) Dec 9 13:31:53 professor /kernel: Mounting root from ufs:/dev/da0s1a Dec 9 13:31:53 professor lpd[104]: lpd startup: logging=0
