On Wed, 11 Dec 2002, Long Le wrote:
> Hi all,
>
> We installed FreeBSD 4.7 on an IBM eServer machine with an on-board
> copper Broadcom BCM5703X and put two more fiber Broadcom BCM5703X NICs
> into the machine. We used cvs to get the latest update on the stable
> branch yesterday. However, only the copper NIC and one fiber NIC
> come up. The log message says "bge2: MII without any PHY!" for the
> second fiber NIC. Does anyone have any suggestion for us?
I'm in somewhat the same boat. We just purchased and installed two ASUS
A7V8X motherboards with onboard Broadcom BCM5702 Gigabit ethernet
controllers, and we're having some problems getting them to work. I
cvsup'd to the latest -STABLE last night, and the controller is found, but
it's using ukphy instead of brgphy. Has anyone gotten this controller to
work successfully in 4.7? Or is this something that I should expect to
see in 5.0 or 4.8?
If this has already been discussed, please accept my apologies, I just
subscribed to the list this morning and I didn't see anything related in a
Google search...
dmesg attached.
-j
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #5: Wed Dec 11 12:39:30 EST 2002
[EMAIL PROTECTED]:/usr/src/sys/compile/ns-2
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1666736035 Hz
CPU: AMD Athlon(TM) XP 2000+ (1666.74-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 536854528 (524272K bytes)
avail memory = 519299072 (507128K bytes)
Preloaded elf kernel "kernel" at 0xc02ad000.
Pentium Pro MTRR support enabled
Using $PIR table, 12 entries at 0xc00f1cd0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b168)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <SiS model 0300 VGA-compatible display device> at 0.0 irq 11
pci0: <unknown card> (vendor=0x1106, dev=0x3044) at 7.0 irq 10
pci0: <unknown card> (vendor=0x105a, dev=0x3376) at 8.0 irq 10
bge0: <Broadcom BCM5702X Gigabit Ethernet> mem 0xed000000-0xed00ffff irq 12 at device
9.0 on pci0
bge0: Ethernet address: 00:e0:18:d3:71:35
miibus0: <MII bus> on bge0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xa400-0xa47f mem 0xec800000-0xec80007f
irq 11 at device 13.0 on pci0
xl0: Ethernet address: 00:50:04:b2:6e:15
miibus1: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xa000-0xa03f irq 10 at device 14.0 on
pci0
xl1: Ethernet address: 00:60:97:77:d9:71
miibus2: <MII bus> on xl1
nsphy0: <DP83840 10/100 media interface> on miibus2
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=1106 device=3177)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 ATA133 controller> port 0x8800-0x880f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x300>
ad0: 19541MB <Maxtor 52049U4> [39703/16/63] at ata0-master UDMA66
ad2: 78167MB <Maxtor 98196H8> [158816/16/63] at ata1-master UDMA100
ad3: 78167MB <Maxtor 98196H8> [158816/16/63] at ata1-slave UDMA100
Mounting root from ufs:/dev/ad0s1a
