>> # camcontrol tur cd0 -v
>> Unit is not ready
>> (pass2:ahc0:0:4:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
>> (pass2:ahc0:0:4:0): NOT READY asc:3a,0
>> (pass2:ahc0:0:4:0): Medium not present
> Well, there's your problem, for better or worse.
it's even kinkier than that. despite dmesg of
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc0 bus 0 target 5 lun 0
cd1: <YAMAHA CRW4416S 1.0f> Removable CD-ROM SCSI-2 device
cd1: 8.333MB/s transfers (8.333MHz, offset 31)
cd1: cd present [270542 x 2048 byte records]
i can put a mountable disk in the TEAC and it will mount only on cd1c (note
the 1 not 0), and vice versa with cd0c. i.e. they are reversed in some way.
and let's remember that the kernel config says
disk cd0 at scbus0 target 4 unit 0
disk cd1 at scbus0 target 5 unit 0
and, if i put an audio cdrom in the teac and xmcd -dev /dev/rcd1c, it sees
the cd, gets the title etc. from the database, looks like it plays, but no
sound.
i will play more after a bit more sleep.
randy
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
