>>> A lot has changed since mid-April. You need to recompile xmcd.
>> had done so. and reconfigured it too.
> Re-configured it? You should build it from the port.
i did. i said reconfigured TOO.
> Did you do a full buildworld?
yes. and did an installworld, mergemaster, and built a new kernel. i have
been making freebsds for a while, though i make mistakes all the time and
presume this is one.
> camcontrol tur cd0 -v
> camcontrol inquiry cd0
# camcontrol tur cd0 -v
Unit is not ready
(pass2:ahc0:0:4:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(pass2:ahc0:0:4:0): NOT READY asc:3a,0
(pass2:ahc0:0:4:0): Medium not present
# camcontrol inquiry cd0
pass2: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
pass2: 20.000MB/s transfers (20.000MHz, offset 16)
there is a cd in the drive and the green ready light is solidly on.
> If they do, and the mount isn't working, it's likely you're having trouble
> with the recent disk/slice changes. I'm not sure how to fix that, someone
> else will have to speak up and explain. Most likely syncing to a more
> recent -current would fix it.
than todays?
> Is there anything that shows up in the dmesg when you try to mount the CD?
good question. unfortunately not.
randy
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
