Randy Bush wrote...
> >> i upgraded from mid-april to current and my cdrom drives went away.
> >> e.g. xmcd says
> >> CD audio: SCSI command fault on /dev/rcd0c:
> >> Status=0x16
> >>
> >> # ls -lg /dev/cd* /dev/rcd*
> >> brw-r----- 1 root operator 6, 0 Sep 3 16:52 /dev/cd0a
> >> brw-r----- 1 root operator 6, 2 Sep 3 16:52 /dev/cd0c
> >> brw-r----- 1 root operator 6, 8 Sep 3 16:52 /dev/cd1a
> >> brw-r----- 1 root operator 6, 10 Sep 3 16:52 /dev/cd1c
> >> crw-r----- 1 root operator 15, 0 Sep 3 16:52 /dev/rcd0a
> >> crw-r----- 1 root operator 15, 2 Sep 3 16:52 /dev/rcd0c
> >> crw-r----- 1 root operator 15, 8 Sep 3 16:52 /dev/rcd1a
> >> crw-r----- 1 root operator 15, 10 Sep 3 16:52 /dev/rcd1c
> >>
> > [ ... ]
> >
> >> cd0 at ahc0 bus 0 target 4 lun 0
> >> cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
> >> cd0: 20.000MB/s transfers (20.000MHz, offset 16)
> >> cd0: Attempt to query device size failed: NOT READY, Medium not present
> >> cd1 at ahc0 bus 0 target 5 lun 0
> >> cd1: <YAMAHA CRW4416S 1.0f> Removable CD-ROM SCSI-2 device
> >> cd1: 8.333MB/s transfers (8.333MHz, offset 31)
> >> cd1: cd present [270542 x 2048 byte records]
> >
> > Your CDROM drives look just fine to me.
>
> yup. that's what really confuses me.
>
> > A lot has changed since mid-April. You need to recompile xmcd.
>
> had done so. and reconfigured it too.
Re-configured it? You should build it from the port.
Did you do a full buildworld? If you just changed your kernel, that won't
do.
> 'nother clue
>
> # mount /cdrom
> cd9660: Device not configured
>
> with /etc/fstab having
>
> /dev/cd0c /cdrom cd9660 ro,noauto 0 0
Okay, what happens when you try the following: (with the same CD in the
drive that you were trying to mount)
camcontrol tur cd0 -v
camcontrol inquiry cd0
If those don't work, you didn't do a full buildworld.
If they do, and the mount isn't working, it's likely you're having trouble
with the recent disk/slice changes. I'm not sure how to fix that, someone
else will have to speak up and explain. Most likely syncing to a more
recent -current would fix it.
Is there anything that shows up in the dmesg when you try to mount the CD?
Ken
--
Kenneth Merry
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
