This one would be it: (it is V2)
http://au.element14.com/stmicroelectronics/st-link-v2/icd-programmer-for-stm8-stm32/dp/1892523
Am 13.03.13 23:57, schrieb Justin Smyth:
So bascially the only option is to get either the st Link V2 or ARM
USB TINY-H , would something like this work ?
http://au.element14.com/stmicroelectronics/st-link/icd-programmer-for-stm8-stm32/dp/1779159
Kind Regards
Justin
*From:* Michael Ring <mailto:[email protected]>
*Sent:* Thursday, March 14, 2013 12:25 AM
*To:* FPC developers' list <mailto:[email protected]>
*Subject:* Re: [fpc-devel] FPC / Lazarus ARM Embedded Debuging
I fould the following announcement:
http://article.gmane.org/gmane.comp.debugging.openocd.devel/17362
So ulink is supported by openocd, not sure if ulink2 is compatible
with ulink.
from what I have googled about ulink2 it seems that it is closely
bound to the uVision Debugger from Keil and they do not seem to
provide a gdbserver.
So if ulink support in openocd does not work for you I would propose
that you spend approx. 25 Euros and buy a stlink V2 interface or
ARM-USB-TINY-H
<https://www.olimex.com/Products/ARM/JTAG/ARM-USB-TINY-H> from Olimex
(EUR40),
I own both and they work just fine with openocd.
I have no plans to make ulink2 work, I have created an interface for
openocd (which provides a gdbserver) that can be used to interface
with different jtag debugging interfaces. http://openocd.sourceforge.net/
Michael
Am 13.03.13 13:16, schrieb Justin Smyth:
Sorry of this cross posts but i wasn't sure where to send this
question to.
I am currently using a LPC 1343 Microprocessor board and i have
recently purchased a ULINK2 debugging kit from china.
i am aware that there are plans to allow debugging these boards using
the UNLINK2, but it wasnt something that is currently available
could i get some help so i can use the UNLINK2 device to debug my
board , i want to be able to write some code in lazarus , upload it
to the board and debug it
I do believe micheal ring was talking bout this
Kind Regards
Justin
ps if you get this and email me back you prob wont get any replies
for 8 or so hours as its after 11pm here in Melbourne AU , i'm off to
bed need some sleep.
_______________________________________________
fpc-devel maillist - [email protected]
http://lists.freepascal.org/mailman/listinfo/fpc-devel
------------------------------------------------------------------------
_______________________________________________
fpc-devel maillist - [email protected]
http://lists.freepascal.org/mailman/listinfo/fpc-devel
_______________________________________________
fpc-devel maillist - [email protected]
http://lists.freepascal.org/mailman/listinfo/fpc-devel
_______________________________________________
fpc-devel maillist - [email protected]
http://lists.freepascal.org/mailman/listinfo/fpc-devel
