On Sun, Jun 28, 2015 at 7:10 AM, Paul B Mahol <one...@gmail.com> wrote:
> Hi,
>
> As you may already know new asf demuxer hit the tree but did not
> replace the old one.
>
> Here I ask for samples which show that one is better than another,
> whichever that one is.
>
>
First file i was using to test:
./ffprobe -f asf_o -i /tmp/g2m4.asf
ffprobe version N-73260-g9842d67 Copyright (c) 2007-2015 the FFmpeg
developers
built with gcc 4.8 (Ubuntu 4.8.2-19ubuntu1)
configuration:
libavutil 54. 27.100 / 54. 27.100
libavcodec 56. 45.101 / 56. 45.101
libavformat 56. 40.100 / 56. 40.100
libavdevice 56. 4.100 / 56. 4.100
libavfilter 5. 19.100 / 5. 19.100
libswscale 3. 1.101 / 3. 1.101
libswresample 1. 2.100 / 1. 2.100
[asf_o @ 0x3401cc0] Suspicious data found! ASF stream #2 will be ignored.
Segmentation fault (core dumped)
When the old one:
./ffprobe -loglevel debug -f asf -i /tmp/g2m4.asf
ffprobe version N-73260-g9842d67 Copyright (c) 2007-2015 the FFmpeg
developers
built with gcc 4.8 (Ubuntu 4.8.2-19ubuntu1)
configuration:
libavutil 54. 27.100 / 54. 27.100
libavcodec 56. 45.101 / 56. 45.101
libavformat 56. 40.100 / 56. 40.100
libavdevice 56. 4.100 / 56. 4.100
libavfilter 5. 19.100 / 5. 19.100
libswscale 3. 1.101 / 3. 1.101
libswresample 1. 2.100 / 1. 2.100
[asf @ 0x38fbcc0] gpos mismatch our pos=24, end=26
[asf @ 0x38fbcc0] gpos mismatch our pos=24, end=3421
[asf @ 0x38fbcc0] Payload extension 50 2
[asf @ 0x38fbcc0] gpos mismatch our pos=24, end=42
[asf @ 0x38fbcc0] Unsupported byte array in tag ASFLeakyBucketPairs.
[asf @ 0x38fbcc0] gpos mismatch our pos=24, end=170
[asf @ 0x38fbcc0] gpos mismatch our pos=24, end=44
[asf @ 0x38fbcc0] Before avformat_find_stream_info() pos: 5400 bytes
read:32768 seeks:0
[asf @ 0x38fbcc0] parser not found for codec wmav2, packets or times may be
invalid.
Last message repeated 1 times
[asf @ 0x38fbcc0] All info found
[asf @ 0x38fbcc0] After avformat_find_stream_info() pos: 292123 bytes
read:294912 seeks:0 frames:53
Input #0, asf, from '/tmp/g2m4.asf':
Metadata:
DeviceConformanceTemplate: L2
WMFSDKNeeded : 0.0.0.0000
WMFSDKVersion : 12.0.7601.17514
IsVBR : 1
WM/ToolVersion : 5.4 Build 1082
WM/ToolName : GoToMeeting
BitRateFrom the writer: 316869
Audio samples : 35053
Video samples : 28157
recording time : Wed, 18 Sep 2013 11:05:00 Eastern Daylight Time
Duration: 00:58:29.57, start: 0.000000, bitrate: 320 kb/s
Stream #0:0, 11, 1/1000: Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz,
1 channels, fltp, 48 kb/s
Stream #0:1, 1, 1/1000: Data: none, 0/1, 2 kb/s
Stream #0:2, 41, 1/1000: Video: g2m, 1 reference frame (G2M4 /
0x344D3247), rgb24, 1440x900, 1/1000, 268 kb/s, 100 tbr, 1k tbn, 1k tbc
Unsupported codec with id 0 for input stream 1
Going to try to run against more samples later this week.
Also, for some other working file, the SAR/PAR is not being set with the
new muxer.
> Thanks for patience.
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
