On Tue, 5 Jun 2001, Doug Gough wrote:
> I'm not able to get my LM8.0 box to work as a router between to LANs.
>
> When it boots, I get a message saying IP forwarding is on.
>
> My routing table is very simple, using static routing as follows
>
> 131.103.1.0 131.103.1.10 255.255.255.0 UG 0 0 0 eth1
> 10.10.0.0 10.10.90.99 255.255.0.0 UG 0 0 0 eth0
> 127.0.0.0 * 255.0.0.0 U 0 0 0 lo
>
> It couldn't get much simpler. I have checked and rechecked the IP addresses and
>netmasks, and found everything to be correct.
>
> >From the 131.103.1.0 network, I can ping 131.103.1.10 and 10.10.90.99, but I can't
>reach anything else on the 10.10.0.0 network.
>
> I've read as much as I can find on the subject, undoubtebly missing the most simple
>and obvious :-)
>
> Any hints and help would be appreciated.
sorry i came in the middle, so if someone has suggested this already,
please forgive me. have you enabled IP forwarding?
