For those interested Here are some freecam videos.
These are all done by someone outside the freecam development team so not sure if it will make it's way in https://youtu.be/eAISiehmBe8?si=0NBYN8iMF4nwn6mb https://youtu.be/6RrxA2tdgbk?si=Ii5U5t6tuR3klSfG https://youtu.be/TfLwzPENFXQ?si=z7h1duoGIWAG82pk https://youtu.be/L6-D_gSTvNo?si=TuvAvoONzp59eN70 https://youtu.be/34Oyi8KvHFQ?si=d91wS5ULr2kuTl3m Cheers andrew On Sat, 10 Oct 2026, 11:18 am Billy Huddleston via Emc-users, < [email protected]> wrote: > Keep in mind, that FC is improving, and improving rapidly now. Faster than > before. It's way better than 0.22, 1.0 was a huge step, 1.1 and now 26.3 > It's come a long long way. > > Billy > > On 10/9/26 6:00 PM, andy pugh wrote: > > On Fri, 9 Oct 2026 at 22:25, Chris Albertson <[email protected]> > wrote: > > > >> Next problem is the FreecAD just happens to have the worst user > interface of any 3D CAD system. It works, but the user experience is > poorer than with other systems. > > I have used worse, but it was a while ago. And I am prepared to > > believe that there are worse out there. But that video seems to > > suggest that it's improving fast. > > > > Arguably OpenSCAD is worse, depending on how you define "user interface". > > > > But I am not necessarily disagreeing with your statement. I can't say > > I am enjoying my ideologically-based switch from Fusion to FreeCAD. I > > am not finding myself modelling for fun in quite the same way. > > > > But I _am_ confident that _my_ models remain _my_ models and will > > always work with the version of FreeCAD on _my_ computer. > > > > > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
