You can connect a Faro arm to several inspection packages. The Faro arm will communicate with Verisurf to collect data. I am sure others will also.
On Sat, Aug 18, 2018, 10:05 AM Dave Cole <[email protected]> wrote: > Looks interesting. > > If I didn't already have a backlog of projects! > > That should be plenty precise for many things. > > What's the alternative? Scales, tape measures, laser levels? > > Any idea how much the official Faro PC card and software costs? Or if it > is even available any longer? > > Dave > > On 8/17/2018 8:18 PM, Andy Pugh wrote: > > > >> On 17 Aug 2018, at 15:00, Stuart Stevenson <[email protected]> wrote: > >> > >> I purchased a Faro Arm Gold many years ago for a particular project. The > >> claimed resolution was either +- .004 or .006. Horrible. > > I think that depends on the application. It isn’t a CMM. I have used > them to return the locations of accelerometers on van body shells. +/- 1mm > is ok there. I wanted this one to locate mounting holes and such on old > vehicles. (Need to make a radiator that actually fits). Again 1/16” is > fine for that. > > > > > > > ------------------------------------------------------------------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
