On Wed, 11 Jan 2017 08:50:28 +0700 TJoseph Powderly <[email protected]> wrote:
> ... > I understand the need for scaling the meters, sort of zoom to look > closer at the process Yes and zoom on step length to fine tune. To scale values in widget is probably a very good idea since it is not real time and only need to be done once. As is now I added scaling to real time thread which require quite many rows and use real time execution then really not needed. > in real machines, we had a switch on the ammeter to change the shunt, > and a switch on the voltmeter changing resistor divider > an electro-mechanical solution so we could watch low voltages and low > current better I think this is common and have often heard the noise of switches in measurement instruments as they switched range. If best possible measurement accuracy is needed this is the method to. > we had no solution to watch midrange values closer This is harder, an offset is needed. I have seen a few improvements and sooner or later I should get enough time to look at them. ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
