> "halcmd show pin" will tell you which pins actually exist. Yes it does.
> Is it possible that the HAL is trying to connect pins before they > exist? Then i copied the row from "halcmd show pin" it worked. Problem is manual claim it should be gladevcp.speedcontrol1-value while in reality it should be gladevcp.speedcontrol1.value and this is in contrast to -s -f used for other widgets. It might be because I use 3.8.0 while manual is for older version. Do anybody knew of a change like this in 2.8.0? Or is this manual in error? http://linuxcnc.org/docs/html/gui/gladevcp.html#gladevcp:speedcontrol > With embedded tabs it is best to connect them up with a HAL > file loaded by the -H option: > http://linuxcnc.org/docs/2.7/html/man/man1/gladevcp.1.html The hal file is loaded witht the row below. It is located in the *.ini file [HAL] section. POSTGUI_HALFILE= charmilles_ui.hal ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/intel _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
