On 2/6/14 22:48 , Pete Matos wrote: > Hey guys, > Been having some small problems with my machine in regards to the > offsets. It has been kind of difficult to get multi tool programs to run > with the correct offsets. At first I thought it was my misunderstanding of > the way it works but now it appears it may be some kinda bug in this
Do you have a program and tool-table that works on 2.5 but fails on master? Have you seen this page? It's helped unhork my offsets once or twice... http://www.linuxcnc.org/docs/2.5/html/common/User_Concepts.html#_when_you_8217_re_lost > version of master. My question is if I wanted to switch back to 2.5.3 > stable release how big of a pain in the ass is that gonna be LOL. Connor Unless you're using any of the new features that are only in master (remapping is the big one), switching between 2.5 and master should be seamless and require no config changes. (Or maybe some minimal changes? Let us know!) -- Sebastian Kuzminsky ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
