Could you explain you issue? If there is a problem with offsets - it should be fixed (atleast start a bug tracker...)
Also - didn't you install from the livecd? You could just run the installed version with your config and see what issue you come up with. sam On 02/06/2014 11:48 PM, Pete Matos wrote: > Hey guys, > Been having some small problems with my machine in regards to the > offsets. It has been kind of difficult to get multi tool programs to run > with the correct offsets. At first I thought it was my misunderstanding of > the way it works but now it appears it may be some kinda bug in this > version of master. My question is if I wanted to switch back to 2.5.3 > stable release how big of a pain in the ass is that gonna be LOL. Connor > helped me graciously to get this thing working and it is working great > other than this issue and he did a bunch of custom stuff like a screen > panel for my MPG and setup some of the toolchanger inputs. Is it possible > to save all this and revert back to the stable release or will we loose all > his hard work in the process. If it is possible how would I go about doing > it? Thanks for all your help guys. Peace > > PetefromTn > ------------------------------------------------------------------------------ > Managing the Performance of Cloud-Based Applications > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > Read the Whitepaper. > http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
