On 22 Oct 2013, at 15:31, andy pugh wrote: > On 22 October 2013 15:23, Marcus Bowman > <[email protected]> wrote: >> That would be a good case for a G68, but I see that command does not seem to >> exist. >> Maybe it should. > One well known program has G68/G69 as XY axis rotation commands, effectively creating rotation offsets. I don't know whether those are "standard" NIST G code commands or not, but they seem jolly handy for this kind of application, and something that would be useful in LinuxCNC. Sorry; not much consolation if they are not available (and I was surprised there isn't an offset like that).
> Which G68? The only one I know of is a front-tool / back-tool switch. > One well known program uses G68/G69 as program rotation > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > ------------------------------------------------------------------------------ > October Webinars: Code for Performance > Free Intel webinars can help you accelerate application performance. > Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from > the latest Intel processors and coprocessors. See abstracts and register > > http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
