On 7 August 2013 08:24, Sven Wesley <[email protected]> wrote: > i did try it out but there's something that I miss. I tried a 10 m/min > calculation with a 5 mm pitch screw and it ended up with a needed RPM from > motor at 60.69 RPM...
I don't know what you did there, unless you are not coupling screw to motor 1:1 10m is 2000 turns of the screw. So 10m/min is 2000 rpm. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
