On Sat, 7 Apr 2012 07:32:21 -0400, you wrote: Gene - those lines did wrap, sorry my bad, had set to 72 chars per line max.
>Thanks Steve, I'll filter this into mine. But it seems to me, with as >clean a waveforms as I have going in, that I shouldn't have to slow it >that much. > >I'll have to read up on the lowpass function to see if it defines what >this "gain" setting means. My copy of the docs, and the online version >both need better explanations as to what these options passed with setp do. > >>From its man page: >PARAMETERS > lowpass.N.gain float rw > >NOTES > The effect of a specific gain value is dependant on the period of the > function that lowpass.N is added to > >Gives no clue about what to expect. And dependent is miss-spelled. :) Yea - that's not very helpful. Can't remember who sorted it for me, maybe Jon Elson or Alex Joni. My signal looked good too, but was deemed unstable without that mod, I don't know why as both my Tektronix o'scope and my Thurlby Thandar frequency counter agreed it was stable and clean. >I haven't attempted to connect the spindle controller yet, my box for >it isn't going to mount cleanly, its wrong size puts the mount holes under >the lathes controller board. So it looks like I'll have to remove the >"speedway" label and "goop" it to the front face of the existing box. >With the wall wart and such parts of its power supply, its too big to >hide in that cover box. > >I should be able to get the motors connected today though, once it warms >up, there is frost on the pumpkin here this morning. Not bad here today, forecast very wet tomorrow, but it's needed - can you believe we already have hosepipe bans in some areas of the UK because of a drought and we seem incapable of pumping water from wet areas to dry ones :) I'm OK, it's nearly always wet up here in the NW where I am <G>. Steve Blackmore -- ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
