On Fri, 2012-03-02 at 21:52 +0200, Viesturs Lācis wrote: ... snip > >From my discussions with Andy Pugh our agreement was that 3-phase > pwmgen output from Mesa card should be the thing to feed into IRAMS > module. ... snip
The parallel port is too slow. I already have a Pluto-P and Pico UPC. I think the 5i25 would be better suited for this application, but not required. I think the three high side inputs will be switched, then the three low side inputs PWM'ed for current control or for sine wave form if needed. The analog I/O may be done with a small AVR to convert analog to 2 or 3 x 4 bit digital. The analog plan is to do just enough to handle these analog signals and keep real-time. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
