Edward Bernard wrote: > Here you can read how Phil Moore of PMinMO.com takes care of the hold-down > problem: > http://millpcbs.com/index.php?option=com_content&view=article&id=17&Itemid=46. > No need to make it more complicated than necessary. > I made a fixture plate with a 1" grid of threaded holes, and clamps that have a "claw" at the end. When set up properly, only the tip touches the work. The idea is that if you clamp the PC board a bit in from the edge, the pressure of the clamp in from the edge tends to flatten the board. You can always mill the edge of the board later to the exact size needed, and that will be aligned with the trace milling.
Jon ------------------------------------------------------------------------------ Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex infrastructure or vast IT resources to deliver seamless, secure access to virtual desktops. With this all-in-one solution, easily deploy virtual desktops for less than the cost of PCs and save 60% on VDI infrastructure costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
