maybe you might find the links interesting... http://metalab.at/wiki/PCB_CNC http://geilomat.soup.io/ the scripting of eagle and visolate are still unpublished, but if you want to have them no problem.. greetings, bernhard
On Mon, Sep 20, 2010 at 11:58 AM, Fox Mulder <[email protected]> wrote: > Here is my second try to mill a test layout with my selfmade cnc. > > http://www.youtube.com/watch?v=UUuqJ32-q7s > > After the milling finished and i removed the dust i saw that i made a > little mistake. I milled a bit too deep and therefore the tracks got > nearly milled away. :( > I calculated the milling depth and width correct but it seems that the > real width is a bit wider than in theory. So i think i have to lower the > depth a bit to get my wanted width. > > At the end of the video i inserted a picture of the finished pcb. > > Next thing for me is to do a few try&error mills with different depths > to find the correct one for my setup. :) > > Ciao, > Rainer > > > ------------------------------------------------------------------------------ > Start uncovering the many advantages of virtual appliances > and start using them to simplify application deployment and > accelerate your shift to cloud computing. > http://p.sf.net/sfu/novell-sfdev2dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
