Here is my second try to mill a test layout with my selfmade cnc.
http://www.youtube.com/watch?v=UUuqJ32-q7s
After the milling finished and i removed the dust i saw that i made a
little mistake. I milled a bit too deep and therefore the tracks got
nearly milled away. :(
I calculated the milling depth and width correct but it seems that the
real width is a bit wider than in theory. So i think i have to lower the
depth a bit to get my wanted width.
At the end of the video i inserted a picture of the finished pcb.
Next thing for me is to do a few try&error mills with different depths
to find the correct one for my setup. :)
Ciao,
Rainer
------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing.
http://p.sf.net/sfu/novell-sfdev2dev
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
