I'm using RHinocam with 2,3, and 4 axis ops and it never crashed the tool or had a software malfunction. I am very happy with that. www.mecsoft.com Rainer
On Sat, Jun 26, 2010 at 2:45 PM, <[email protected]> wrote: > Hi > I want to ask about CAD/CAM or just CAM software. There are many CAM out > there MasterCAM, UG, CATIA, PowerMill. > I talk to mold making shop and they said that they tried all those CAM and > chose to use PowerMill. Remaining CAM from the list occasional crash > and/or break tool. > Price wise PowerMill for everything for mill - $ 30 000. - most expensive > one. > CATIA everything for mill only $21 500. > Is highest cost of PowerMill justified and is it really best CAM software > on the market? > > Aram > > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Sprint > What will you do first with EVO, the first 4G phone? > Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- _________________________________ Rainer M. Schmidt Complex Consulting LLC [email protected] Voice (646)-657-8815 FAX (646)-435-9216 ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
