On Tue, 8 Dec 2009 20:54:04 +0000 (GMT), you wrote: >Dear Steve > >> I wish I knew how, I've spent days on this now and pretty much given up. > >I do also have the ver same problem here: installs OK, can be calibrated but >then mirrors inputs on y axis. > >I tried an install on Suse 11.2 and the results are initially the same: y axis >mirrored and SwapY does not work. However, exchangin values of MaxY and MinY >solves the problem. > >Tomorrow I want to compare the sources and see what this gives. eventually we >could recompile a patched hard version?
Hi Chris - I finally got this to work, I gave up with mutouch! I downloaded the 3M driver, searched online in linux forums, found how to unpack and install, after several attempts, I finally got it to work. The only use the mutouch program had, was it told me which file the parameters live in :) The Axis screen isn't very touch screen friendly so I still need a mouse to do some tasks. The biggest problem is the small sliders for jog and feed speed, the jog one's a pain when initially setting up a job. A Shift/Jog for rapids would help enormously here, so only the slow jog speed need be set for the final touch move. Once touched off, the run/pause/stop buttons are fine. For manual stuff the spindle controls are also a bit small, there's enough free space around them so I assume they could be made bigger? Steve Blackmore -- ------------------------------------------------------------------------------ Return on Information: Google Enterprise Search pays you back Get the facts. http://p.sf.net/sfu/google-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
