> > M61 Qxx is there to allow you specify the currently loaded tool. > If you shutdown emc2, and restart it will not remember the tool number it > last had loaded, so one can use the M61 to specify the current number. > This only works in MDI though, I don't think it's usefull to specify it from > a program. > > Regards, > Alex > aaah yea i did this from MDI, this is a shame if emc does not store current tool into a paramiter looks like i need to keep a perm record in plc some how then.
so what you are saying is iocontrol.0.tool-number will be zero on startup regardles of the last tool from the last sesion > > > ------------------------------------------------------------------------------ > Register Now & Save for Velocity, the Web Performance & Operations > Conference from O'Reilly Media. Velocity features a full day of > expert-led, hands-on workshops and two days of sessions from industry > leaders in dedicated Performance & Operations tracks. Use code vel09scf > and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.320 / Virus Database: 270.12.15/2093 - Release Date: 05/02/09 > 14:23:00 > > ------------------------------------------------------------------------------ Register Now & Save for Velocity, the Web Performance & Operations Conference from O'Reilly Media. Velocity features a full day of expert-led, hands-on workshops and two days of sessions from industry leaders in dedicated Performance & Operations tracks. Use code vel09scf and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
