Chris Morley wrote: > >> i am just implementing the tool changer and i would like to know when >> setting the current tool with >> M61 Q02 >> this should set current tool in spindle to T02 >> will this also set the iocontrol.0.tool-number = 2 >> as when issuing the above the tool-number value did not change from 0 to >> 2 as exspected >> >> > > Did you copy this wrong? > > should it not read m6 t2 ? > no M61 Qxx should tell EMC which tool is in the spindle, like right now i have pocket #2 facing spindle so i need to tell EMC tool2 is already in the spindle as right now it thinks it has tool 0 up which does not exsist on this machine. as 1 - 16 is valid
> > > _________________________________________________________________ > One at a time or all at once? Get updates from your friends in one place. > http://go.microsoft.com/?linkid=9660827 > ------------------------------------------------------------------------------ > Register Now & Save for Velocity, the Web Performance & Operations > Conference from O'Reilly Media. Velocity features a full day of > expert-led, hands-on workshops and two days of sessions from industry > leaders in dedicated Performance & Operations tracks. Use code vel09scf > and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.320 / Virus Database: 270.12.13/2091 - Release Date: 05/01/09 > 17:52:00 > > ------------------------------------------------------------------------------ Register Now & Save for Velocity, the Web Performance & Operations Conference from O'Reilly Media. Velocity features a full day of expert-led, hands-on workshops and two days of sessions from industry leaders in dedicated Performance & Operations tracks. Use code vel09scf and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
