Matt,
I finally found some time to look at your files.
Thanks, the files look great - well documented so this should get me
going without any problems.
I just ordered 2 5i20 boards so I have a spare or a second system to
play with. This will also give me enough I/O to add all the extra I/O I
wanted (all separate limit switches, home switches, probe input, E-stop
input, full spindle control, MPG pendant, coolant control and motor
driver feedback)
Electronics hardware is cheap compared to milling cutters. I just ruined
a 10mm end mill with a cutting length of 100mm and a flute of 200mm used
especially for milling foam. A 240 dollar piece of carbide converted
into 12 pieces of worthless junk due to a 0,10 dollar screw that came
loose ...
Position feedback encoders on the axes should have kept the value of the
carbide at a proper level :-}
Regards,
Rob
> Sorry I'm so late noticing this e-mail! Here are the config files:
> http://www.mattshaver.com/emc2/configs/smithy/
>
> You'll be most interested in 1240.* and 622.*. the 924.* files are for a
> lathe.
------------------------------------------------------------------------------
This SF.net email is sponsored by:
High Quality Requirements in a Collaborative Environment.
Download a free trial of Rational Requirements Composer Now!
http://p.sf.net/sfu/www-ibm-com
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
